CUAV U-blox NEO-M8N GPS Module For Pixhack/Pixhawk/APM Flight Controller

CUAV U-blox NEO-M8N GPS Module For Pixhack/PX4/APM Flight Controller
CUAV U-blox NEO-M8N GPS Module For Pixhack/PX4/APM Flight Controller
CUAV U-blox NEO-M8N GPS Module For Pixhack/PX4/APM Flight Controller
CUAV U-blox NEO-M8N GPS Module For Pixhack/PX4/APM Flight Controller
CUAV U-blox NEO-M8N GPS Module For Pixhack/PX4/APM Flight Controller

Description:
Brand Name: CUAV
Item Name:  NEO-M8N GPS module
Chip: U-blox NEO-M8N
Version: PIXHAWK,PIXHACK,APM(optional)
GPS Line Define:
  - Red: VCC
  - Black: GND
  - Green: RX
  - Yellow: TX
Compass Line Define:
  - Orange: SCL
  - White: SDA

Specifications:
- Receiver Yype: 72-channel u-blox M8 engine
- Nav. update rate Single GNSS: Up to 18 HZ
- Concurrent GNSS: Up to 10 Hz
- Position Accuracy: 2 2.0 m CEP
- Acquisition Cold starts: 26 s
- Aided starts: 2 s
- Reacquisition: 1.5 s
- Sensitivity Tracking & Nav: –167 dBm
- Cold starts: –148 dBm
- Hot starts: –156 dBm
- Operating Temp: –40° C to 85° C
- Storage Temp:  –40° C to 85° C
- Timepulse Configurable: 0.25 Hz to 10 MHz

ParameterSymbolMinTypicalMaxUnit
s
Condition
Power Supply Voltage  VCC1.653.03.6V 
Supply Voltage USBVDDUSB3.03.33.6V 
Backup Battery VoltageV_BCKP1.4 3.6V 
Backup Battery CurrentI_BCKP 15 μAV_BCKP = 1.8V,
VCC = 0V
SW Backup CurrentI_SWBCKP 30 μAVCC = 3V
Input Pin Voltage RangeVin0 VCCV 
Digital IO Pin Low Level Input VoltageVil0 0.2*VCCV 
Digital IO Pin High Level Input VoltageVih0.7*VCC VCCV 
Digital IO Pin Low Level Output VoltageVol  0.4Vlol = 4mA
Digital IO Pin High Level Output VoltageVohVCC-0.4  Vloh = 4mA
USB_DM,USB_DPVinUCompatible with USB with 27Ω series resistance
VCC_RF VoltageVCC_RF VCC-0.1 V 
VCC_RF Output CurrentICC_RF  50mA 
Receiver Chain Noise FigureNFtot 2.0 dB 
Operating TemperatureTopr-40 85°C 

Features:
•  Concurrent reception of GPS/QZSS, GLONASS, BeiDou
•  Industry leading –167 dBm navigation sensitivity
•  Product variants to meet performance and cost requirements
•  Combines low power consumption and high sensitivity
•  Simple integration with u-blox cellular modules
•  Maximum update rate can reach 18Hz
•  Supported GPS and BeiDou
•  Can search more than 15 satellitesHDOP numerical positioning accuracy up to 0.5 m ~1.0 m
•  Provides high sensitivity and minimal acquisition times while maintaining low system power
•  Built on the exceptional performance of the u-blox M8 GNSS (GPS, GLONASS, BeiDou, QZSS, SBAS and Galileo-ready) engine in the industry proven NEO form factor
•  Optimized for cost sensitive applications, while NEO-M8N provides best performance and easier RF integration. The NEO form factor allows easy migration from previous NEO generations. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.
•  Combines a high level of robustness and integration capability with flexible connectivity options.  The future-proof NEO-M8N includes an internal Flash that allows simple firmware upgrades for supporting additional GNSS systems. This makes NEO-M8 perfectly suited to industrial and automotive applications
•  An additional front-end LNA for easier antenna integration and a front-end SAW filter for increased jamming immunity

NEO-M8N Datasheet please click here

Package Included:
1x GPS module
1x Folding base accessories set