Studio : Voyage

Publisher : Voyage

Binding : Electronics

Product Description
How to use

1.) Connect the coaxial cable on the antenna to the amplifier.
2.) Place the antenna, preferably on a window or as high as possible.
3.) Connect the HDMI cable from the amplifier to the TV.
4.) Go to input on your TV and make sure it is set for TV
5.) Go to the menu on your TV and make sure it is set for "air" or "antenna", whichever you TV menu has.
6.) In the menu on your TV go to "Scan for Channels" or "Channel Scan" etc., select "ok" and scan. This may take up to 20 minutes to complete.TV programs.


Working frequency:

VHF(172-240Mhz) \ UHF(470-860Mhz). Channel reception may vary depending on what's broadcasting in your area, distance from broadcast towers, terrain and the surroundings.


If your Indoor TV antenna is not working as expected, try the following tips:

1, Check to make sure you have correctly connected the antenna to your HDTV or third-party HD receiver.
2, Re-scan for channels: In the TV's setup menu, set the mode to indoor antenna or air. Refer to the TV manual for detailed instructions.
3, Reposition the amplifier antenna in a different location. It is suggested place it higher on a wall or closer to a window. Sometimes moving a few feet can make a difference.
4, keep the indoor antenna away from those big power consumption devices interference, such as air conditioner, refrigerator and microwave oven,etc.
5, This is an amplified TV antenna. If a signal cannot be received with the external amplifier, remove the antenna amplifier and try again.


Package include

1)VOYAGE indoor TV antenna with 13.1ft coax cable
2) USB power adapter with spare cable
3) Amplifier signal booster

0