Highly use in car workshop or carpentry purposes. Can be use to touch up on Car / Bike body before spraying a new coat of paint.

Application

1) Remove rust, oil, dirt, old film, water, etc from surface completely by sander and solvent 2) Standard mixing ratio of base and hardener is : Base/Hardener = 100/2 (weight) 3) Mix Base & Hardener thoroughtly to make the colour of the mixture uniform 4) After complete mixing, apply the mixture within pot life (7-10min). 5) Apply the mixture rubbing down fully with spatula to avoid bubbling. 6) Sanding shall be made after complete drying (for more than 1h at 20deg) 7) In high humidity, especially during rainy season, the hardening time becomes longer than usual