Product Type: TM-006
Lamp beads Model: Q5 / T6 / L2
Lens Material: Optical Lens
Work stalls: 5 stalls
Applicable battery: 18650 or 3 section 7
Lumen Brightness: 1000 lumens
Material: aluminum alloy
Working voltage: 3.7V
Light source color temperature: 6000K
Product Color: Black
Product lamp cup: none
Can direct charge: No
Whether the focus: telescopic focus
Features:
1. US imports XML-T6 lamp beads, the highest brightness of 1000 lumens, the service life of 100,000 hours;
2. Convex lens: Hawkeye lenticular lens, light transmission performance is good, easy to damage, strong aluminum attack head protection lens from wear;
3. Telescopic zoom: left and right stretch head can be zoom, astigmatism - condenser mode, easy to use in different circumstances;
4. Tail switch: high-quality natural rubber material, the surface anti-skid handling, touch switch switch lighting mode;
5. Battery contacts: copper-plated cylindrical battery contact design, copper has a good electrical conductivity, effectively prevent bad contact.
one. Switch instructions
1, the battery for the positive inward (lamp side), the negative outward (tail).
2, the switch in the tail, the switch function is a switch function, light switch is dimming function.
two. Circuit board instructions
1, our flashlight using advanced constant voltage constant current technology, can effectively solve the LED flashlight on the constant current requirements.
2, special tips: a. Do not overpressure, the voltage should not exceed 4.2V b. The battery is facing forward, do not reverse, or will burn board c. Note control the torch temperature changes, to ensure heat d. Non-professionals Do not open the circuit board
3, the warranty note: open or deal with the circuit board is no longer warranty coverage.
three. Lithium battery instructions
1, lithium battery features: lithium battery and mobile phone battery charging method is completely different; lithium battery no memory, can always charge, do not overcharge and over discharge.
2, the first charge of 6 hours at least, after the green light on the charger can be, and no charge overcharge.
3, especially prompted to use anti-overcharge, anti-reverse, anti-short circuit of the "three anti" charger;
4, do not use the battery for a long time, should be filled with electricity, normal in about three months and then charge and discharge once;
four. Flashlight instructions
1, flashlight in use, according to the flashlight on the voltage and battery requirements to choose, do not indiscriminate use, to prevent burning bad circuit boards, different models, different voltage batteries do not use at the same time.
2, in use, when the torch brightness changes significantly to turn off the torch to prevent the battery over discharge.
3, cooling skills: flashlight in the use of the process, to ensure that heat. Strongly require the battery is fully charged, it is best to use the second gear, so that the torch of the lamp and the battery can be extended product life! Can not direct the torch light eyes, super bright glare, so as not to affect vision, especially children.
Fives. Troubleshooting
1, check the battery: to ensure that the battery is installed in the right direction and installed the battery, can not use different brands of batteries, old and new batteries can not be mixed.
2, check the tail cover: to ensure that the switch has been tightened and good contact to ensure that the tail cover copper pillar and tail cover ring metal contact good, pay attention to whether the lamp is loose.
Package Content:
1* flashlight full set