Features:
| Cooskin YCP-C001 | ||||
| Product Name | laptop cooling pump | |||
| Material | aluminum and magnesium alloy | |||
| Color | silvery | |||
| Product Size | 76mm*66mm*36mm | |||
| Packing Size | 150mm*80mm*48mm | |||
| Accessories specification | silica gel fan housing 67mm*1, 73mm*1, 81mm*1, USB DC power line 600mm*1, supporting piece for long silica gel fan housing*1 | |||
| Air Volume | Current | Voltage | power | weight |
| 16.5 CFM | 0.25mA - 0.5mA | 2.8-5V MAX | 2.5W | 160g |
Suit for:
Game player, designers, computer engineers and all kinds of high-end computer users...
Instructions for using:
- 1.Choose a silica gel fan housing which is longer than notebook air outlet.
- 2.Tear off the cooler exhaust outlet’s transparent silica gel sticker, then installation the suitable silica gel fan housing in the cooler.
- 3.When you using the longest silica gel fan housing (81mm), you should stick the supporting piece into the two side of cooler air outlet.
- 4.Let this cooler to point at your notebook air outlet. Then use two claws of the clamp to lock the notebook’s edge and push on correct place.
- 5.After finish the installation, you should check if the cooler parallel with your notebook. If the tail of cooler upward, show the clip is too tight. If the tail of cooler downward, show the clip is too loose.
- A. When the clip is too tight, bend the two claws of the clamp up. Make the distance between claws and baseplate bigger.
- B. When the clip is too tight, bend the two claws of the clamp down. Make the distance between claws and baseplate smaller.
- C. The following method can applied for the 15-31mm thickless notebook.
Our Factory:
Welcome to your order, thank you.