Mini DV Instructions:
Features
Sleek， stylish exterior design， the product of the whole machine UV coating， fashion wear; with a variety of portable tools
Support network camera， with a network chat
Support AVI video format
In low light， can be high-definition video 720X480 30 frames / sec and 320X240 30 frames / sec network video output
Support normal USB1.1 and high-speed transmission USB2.0 interface
Maximum support 16GB TF card
Camera operating time between a situation where a fully charged one hour.
II. Operation Guide
Charging:
The machine built-in rechargeable lithium battery， the initial use of the machine， first charge， MINI DV charge through the following ways:
1)， connected to the computer charging， use USB data cable connected to the computer， you can charge
2)， with a charger， USB data cable connection and charger base， then plug the mains charger socket， you can charge.
When charging， the green and red light， are in a resting state.

Note:
a. Make sure to confirm that the inserted T-flash (Micro SD) card，
b. If no card， will automatically shut down in 30 seconds
d.T-flash (Micro SD) maximum capacity of 16GB.
e. will take some time to save the file，
f. Do not continuously press the action key when saving， etc.，
g. This will cause the recorded file can not be successfully saved， and the resulting file is incomplete.
j. Please adequate lighting environment， the camera lens at the photo of the image，
l. and the subject distance of more than 50cm， will be right， natural color， clear and stable image.
3. The voice-activated camera
Tap the Power button， the blue indicator light. Tap the MODE key at this time， you can switch to voice-activated camera mode， then blue light， red light flash (indicating the voice standby mode). When recording live sound over 60 db， D001 begin automatic recording， then blue light， red light flashing slowly (instructions in voice-activated camera).
After each start voice recording， each camera shortest time of 2 minutes， if after two minutes in video recording scene is silent， the video files are automatically saved and converted to the standby mode; if the video two minutes After the scene is still sound， the recording will continue for some time.
4. time setting
CD-ROM products in the annex， in which there is a paper for the time synchronization file， users copy this file to TF card， the machine after connecting the computer， the machine will be directly synchronized to a time time computer display.
Specific usage is as follows:
1. Create a new text document named TAG.TXT file in the root directory of card
2， open TAG.TXT document， in strict accordance with the format attachments to synchronize the time to write
Specific format is as follows:
[Date] <- need space with newline
2009/07/22 <- need space with newline
12:30:30

Each boot， the system will check and analyze TAG.TXT document， and according to which time， set the system time， set finished， the system will automatically delete this document!
5. Shutdown
In the camera mode or standby mode， always press the Power button for 3 seconds， release the button until the light is off， the machine has been shut down
6. Connecting a computer
In shutdown mode， standby mode or video mode， can be directly connected to the computer， connect your computer can be used as U disk， who can copy a file， cut and paste， delete.
Put the machine into the computer USB port， after a few seconds the computer will pop removable disk logo， the red indicator light， green lights flashing in the moment Always.
Hint:
a. The machine connected to the computer， if the computer does not recognize， or fail to eject in 30 seconds removable disk logo， please re-plug again.
b. proposal is better copy or cut video file to your computer's hard drive and then play， direct broadcast saved in the recorder built-in memory in the video files， may be because the data is too large， transmission can not keep up， which led to Play not smooth.
7. PC camera function:
Before first use PC camera， please install driver. Drivers named SPCA1528_V2220_M ... Setup.exe， placed in the supplied CD-ROM， double-click the file， follow the installation prompts to complete the installation， the installation on your computer desktop form a AMCAP icon.
In the off or switched on， with a USB cable to connect the machine to the computer， the state is the U disk mode， short press MODE button， then switch to the PC camera mode， click on AMCAP icon， you can use when the computer camera.
8. Reset:
When this unit because of illegal operation or other unknown reasons， is not working properly， you need to reset the product.
Specific methods of operation are: using a thin rod (toothpick) press the reset button (Reset)， you can achieve a reset operation.
10. Precautions
Use: Please strictly abide by relevant state laws， this product can not be used for any illegal purpose， or peril.