Where can this product be used?

Repairing holes, cracks and chips in wooden surfaces
When dry, this product can be nailed, sanded, stained, painted and laquered
When dry this product can be treated in the same way as real wood
Not suitable for exterior conditions
Not recommended for use where structural movement may occur


What materials is this product suitable for?

Wood
Tmber
Wood veneer
How to use this product

Ensure surfaces are clean, dry and free of loose material.
Apply with a putty knife. Slightly overfill deep holes to allow for sanding. Do not fill more than 6mm in each application.
Allow to dry before sanding, staining or painting.
Replace lid firmly after use and store in a cool place.
Handy tips

If product has stiffened or has an oily separation layer due to extended storage, mix thoroughly. If still stiff, add a few drops of acetone or methylated spirits and again mix thoroughly. If hardened in the can discard product.
Clean up tools with acetone.




Safety tips

Product is highly flammable
Avoid contact with the skin and breathing the vapour
In case of contact with the eyes, hold eyes open and flood with water for 15 mins. Seek medical advice if irritation persists
For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.