Colour: Pink
<br />Size: 12cm
<br />Material: Stainless Steel;
<br />Surface treatment: mirror light processing, bright as a mirror. Steel surface has a transparent blue PP protective film, protective film torn off before use;
<br />Quality characteristics: safe, durable, fine workmanship, innovative design, lightweight body clip, convenient and practical.
<br />Instructions:
<br />1. Simple repair, clean nails, can be coated with base oil or light oil to enhance the coloring power of nail surface, let it completely dry before painting.
<br />2. Remove the print head with cotton dipped in nail polish remover scrub pad a few times, so that was a fuzzy-like plastic head, otherwise it will not transfer the pattern;
<br />3. Select the plate, stencil designs, coated with a little colored nail polish, painted in oil on a good choice of pattern, and then scrape with a spatula on the pattern of excess oil painted from the inside out, pay attention to only scratch once the best, do not scratch back and forth only scrape in one direction;
<br />4. The slit pattern have residual nail polish, nail polish does not take advantage of the dry, the seals and stamps bonnet push hard on the pattern, the pattern is transferred to the printing head, quickly transfer the pattern onto your nail designated site; Note : Primer dries to wait printed on, after the above, the pattern after dry, then coated with light oil.
<br />5. Repeat on other nails;
<br />6. can be a little on the dotted pattern (flower core, the eyes of animals and other points where you think the need embellishment glitter or diamond) finally rub on light oil saver to avoid scraping or fade.
<br />7. Use a cotton swab dipped in nail polish remover to clean steel blade and print head.
<br />
<br />Packaging: a seal, a printing plate; Blister cardboard packaging