Brand new and high quality<br />HM8003 is EM Proximity card reader. It reads EM card identification number and transmit it to access control system by using the common wiegand26 bit or other interface based on client requirement later<br />HM8003 is designed with full range protection hardware to avoid the damage from ESD or suger<br />Wide range input voltage and standard wiegand interface<br />Easy to connect with the most of controller host in the marketing<br />LED and buzzer can be controlled from host<br />Power: 5-15VDC at 100mA<br />ESD protection: 2000V<br />Suger protetion: 1000V<br />Interface: Wiegand26<br />Reader range: up to 8 cm.<br />Frequency: 125KHz<br />Support card: EM ID card or EM 4100 compatible RFID cards.<br />Operation temperature: -25°C - +70°C<br />Operation humidity: 5% - 95% (no condensing)<br />Audio/Visual indication: green LED backlight and buzzer signal output.<br />IP65 waterproof<br />Dimension: 80 x 43 x 17 mm<br />Weight: 100g<br />1 x Card reader<br />2 x Set screws<br />In original package<br /><img src="http://img6.eachbuyer.com/x13/p68/bf054_1.jpg" />                                                        <img src="http://img6.eachbuyer.com/x13/p68/bf054_2.jpg" />                                                        <img src="http://img6.eachbuyer.com/x13/p68/bf054_3.jpg" />                                                        <img src="http://img6.eachbuyer.com/x13/p68/bf054_4.jpg" />                                                        <img src="http://img6.eachbuyer.com/x13/p68/bf054_5.jpg" />