① Stainless steel handle

② Stainless steel cap

③ upper part made of stainless steel

④ stainless steel lower part main part

⑤ Ceramic blade (concave blade + convex blade)

⑥ Adjusting screw

⑦ Silicon Band

⑧ Storage bag

You can grind coffee beans to your desired roughness by tightening or loosening adjustment screws.

* Fine grinding with clockwise rotation

* Coarse ground with counterclockwise rotation



Please adjust the black cap part of the handle with one hand at that time.



Turning the adjustment screw will produce clicking noise, so please use it as a guide for adjustment.

Be careful not to tighten the adjustment screw tightly when using for the first time (or when using it for the first time after cleaning).

Turning the blade while tightening the adjusting screw without coffee beans may cause damage to the ceramic blade.

When using with ultrafine ground, please put the beans and tighten the adjusting screw tightly to the maximum after turning the handle several times. It is OK to use it tightly tightly until the next cleaning.



If it is not to be used for a long time, we recommend that after cleaning the ceramic blade and the upper part of the main body, it should be dried well before storage. * After washing please attach the person with the streak on the adjustment screw face upward.