? The Portable Car Jump Starter is a convenient and powerful device that combines 3 different products: a battery charger， a car jump starter， and an LED flash light altogether into one compact design that can easily fit inside your pocket， the glove box inside the vehicle， or carry bag for travel. It’s also a portable power bank battery chargers.

Features:
It’s a Jump Starter – quickly jump starts a dead battery of 12V car just in seconds.
Portable battery charger with charging adapters for all major electronic devices.
High Capacity Lithium Polymer battery power pack: 12000mAh.
Only takes 1 hour for a smart phone to be fully charged.
Compact car jump starter that can jump start your car 20 times on a full charge.
Use of the most stable Linear Chipset.
With a built-in LED emergency light，ultra-bright LED flash light， strobe light， and SOS signal light that lasts 120 hours.
Built-in protection features: over current protection; short circuit protection; overload protection; over-voltage protection; over-charge protection.
Portable compact design that will easily fit in your pocket， backpack， or glove box for convenience.
This product is used to activate gasoline vehicles of 3.5 liter or less.
Also suitable for Gasoline Automobile， Motorcycle， Jet Boat， Jet Motorcycle.

Specifications:
Capacity 12000mAh(44.4Wh)
Battery type LiCoO( lithium cobalt oxide)
Two USB Output   5V/2.1A    5V/1A
Starting current 200A
Peak current 400A
LED Mode Normal，Strobe，SOS
Full charging time Approx 3 hours
Color Red and Black 
Operating temperature -20~85  ℃
Life Cycle 1000 times
Protection circuit over-charge，over-discharge，anti-reversing charging protection
Product size 165*75*30mm（L * W * H）/ 6.5 * 3.0 * 1.2in
Product weight 359g / 0.79lb
Package size 28.0 * 23.5 * 5.5cm / 11.0 * 9.3 * 2.2in
Package weight 999g / 2.20lb

How to Jump Start a Dead Car Battery? 
1.Connect the jump start cable to the dead battery of the Car. The RED clamp to the positive “+” terminal and the BLACK clamp to the negative “-” terminal.
2.Connect the jump start cable to the jumpstart socket of LIPOWER T6.
3. Press the On/Off button of LIPOWE T6 until the blue battery light indicator is ON .
4. Now attempt to crank start the engine.
5.After the engine’s started successfully， remove the jump start cable.


Package list:
1 * Jump Starter Device
1 * Car charger
1 * AC Adaptor
1 * Jump Starter booster cable
1 * User Manual(English)
1 * Case