Dimensions

Head Dia.: 2.5 inches (62 mm)
Body Dia. : 2 inches (52 mm)
Length: 5.6 inches (143 mm)
Weight :14.3 ounces (408 grams)¹

Battery Type

4x18650 or 8xCR123A²
Compatible battery (diameter/length)123A: (16-16.8mm/34-34.5mm)
18650: (18-18.8mm/67-68.5mm)

Read precaution with li-ion batteries.

Operating voltage

10V - 24V, Do not exceed 24V. Do not use rechargeable 3.0v/3.7V CR123A.

What's included

MX25L4C flashlight
Spare o-rings
User Manual
Mil-Spec Para-cord Lanyard w/ quick attachment clip
4xCR123A Battery Magazines

All models

Base modelIncludes everything listed in "what's included" section above.
Comes with smooth aluminum bezel.
Flat tail-cap (tail-stand)

KitIncludes everything listed in "what's included" section above, plus:
(Extra) signal connection through the body tube for rear accessories add-on
Tailcap w/ switch and tail-standing ability
Flashlight head come with front-mount thread for bezel and filter attachment
Stainless steel bezel
Heavy Duty Nylon Holster w/ self-retention device and open-top design

Carrying method

Para-cord lanyard with quick attachment clip

Waterproof

IPX-8 standard

Replaceable items

Lens

LED

4 * CREE XM-L2 Cool White U2 LED

Max output

CREE XM-L2 U2 LEDLED lumen: 4800
ANSI FL-1⁴ lumen: 4020

Beam Profile

CREE XM-L2 U2 LED

Center lux: 60,100 lux
Center spot angle: 4°
Spill light angle: 51°
Beam distance: 536 yards / 490 meters

Lens

Waterwhite glass lens w/ harden treatment
Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

C7000 HVWide voltage input range
48-Watt output
Low internal resistance design offers up to 93% efficiency⁷
Non-dimming constant current regulation for all output levels
Negligible uA standby current
Energy saving feature⁵
High voltage mode to reduce output above 18V input
Dual color LED voltage report system

Reflector

Smooth aluminum reflector

Material

HAIII hard anodization aerospace aluminum

Controls

Output and Runtime

Four brightness levels (Regular mode)Led lumen: 4800⁵/2180/410/18
ANSI FL-1 lumen: 4020⁵/1830/345/15
Runtime: 1.5/2.5/20/300+ hours (4x18650)
0.9/1.7/11/150+ hours (8xCR123A)

Seven o brightness levels + Strobe (Tactical mode)Led lumen: 4800⁵/1000/Strobe I/II
ANSI FL-1 lumen: 4020⁵/835/Strobe I/II
Runtime: 1.5/7 hours (4x18650)
0.9/4.8 hours (8xCR123A)

Seven hidden auxiliary outputsStrobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)

Operations

Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
For momentary on, press and hold the button switch for immediate output.
Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.
Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd (or 4th level) and tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
Advance (Programmable Features) To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for five times within five seconds.

High voltage mode - For optimal circuitry temperature operating at higher voltage, when initial startup voltage exceeds 18V, the maximum output will be reduced by 15%.
LED voltage indicator

4 x 18650 mode

(Red flashing) Low than 12.4V
(Red) Between 12.4 and 14V
(Blue) Higher than 14V

8 x CR123A mode

(Red flashing) Low than 13.5V
(Red) Between 13.5 and 16.5V
(Blue) Higher than 16.5V

Other features

LED direct soldering on copper for maximum heatsink ability
User replaceable glass lens
Battery reverse polarity protection
Tail stand
Battery reverse polarity protection
Ultra low internal resistance phosphor bronze springs (silver coated)
Tail-cap w/ switch (Kit)

Warranty

Ten years performance guaranteed warranty
Read flashlight regular maintenance

***********************Attention*********************

High-brightness LED flashlight bright flashlight. In continuous operation will generate

alot of heat. To ensure the safe use carefully read the operating manual and the following

warning

1. Do not turn the torch on the place unattended

2. Do not give children to play or use a flashlight

3. Do not let the torch's glasses to direct sunlight.

4. Do not use the direct without the protection of rechargeable lithum batteries

5. For a long time when storge or transporation of the torch, remove the battery

6. Use a soft cloth to clear every six months torch thread, and use silicone oil lubrication of threads

7. Do not use the oil from the pertroleum refining exposure to water O ring will cause water damage.

***********************Attention**********************

Delivery time:

SingPost Registered Mail, we mail out within 0-2 working day together with tracking No. after payment confirmed

For any enquiry, feel free to email us at kaisinstore@gmail.com