Note:
<br />* Please check the PLUG carefully,we don't accept the refund that due to choose the wrong plug
<br />* The 300Mbps is the max speed theoretically,the practical speed determined on your network port!for example:my max network port speed is 50Mbps,the repeater cannot enlarge the single more than 50Mbps
<br /> Specifications:
<br />1. The WiFi Repeater is a Combined Wired/Wireless Network Connection Device
<br />2. Latest Software wizard for easy setup
<br />3. Access to Wireless standard 802.11n with Wireless Transmission Speeds of Up to 300Mbps
<br />4. Easy to Extends the Range of your Wifi Network, No Worry about the Obstcal Weaken the Wifi Signal
<br />5. Also Works Well with Other 11b/g and 11n Protocol Wireless Products
<br />6. Improves Wireless Coverage in all WLAN Networks
<br />7. Provides up to 300Mbps Transmission Rates
<br />8. Downward complies with 802.11g (54Mbit/s) and 802.11b standard (11Mbit/s)
<br />9. Operating Temperature : 0ºC~40ºC
<br />10. Storage Temperature : 10~70ºC
<br />11. Relative Humidity (Operational) :10%~90% , noncondensing
<br />12. Relative Humidity (Storage) :10%~90% , noncondensing
<br />13. Support 2.4 GHz WLAN networks
<br />14. Support Wireless Repeater Mode and Standard AP Mod
<br />15. Wireless access point or network extender to bring wifi to your home, study or office
<br />16. Antennas integrated
<br />17. Maximum WLAN security with WPA2, WPA and WEP (128/64)
<br />18. Use it to Extend the Range of your Wifi Network Over a Wider Area or Eliminate dead-spots due to low signal power
<br />19. No Trailing Wires around the place
<br />20. Distance: Outdoors 300m , Indoor 100m (According to the Actual Environment Change)
<br />
<br />Package included::
<br />1pcs  Wifi Repeater
<br />1pcs  Plug (we will send the plug that you chose)
<br />1pcs  RJ-45 Networking Cable
<br />1pcs  English  Installation Manual    
<br />
<br />Common question:
<br />Q;Why i connect the repeater,but can't landing the 192.168.10.1 page?
<br />A;1:reset the repeater:keep the repeater power supply and press the "reset"button,keep 6s or above,the SYS light flash show the reset succes.
<br />2:modify your PC IP address,and let it be in the same group with the repeater,mode your PC IP address to 192.168.10.5  and DNS to 255.255.255.0,and then you can set the repeater,please note to change your PC to auto get IP address after set the repeater,or you couldn't  connect the internet.
<br />
<br />Q:I forget the repeater username and the password,how to solve it?
<br />A:the only way is to reset the repeater,keep the repeater energized,and press the "reset"button for 6s or above,still the SYS light flash,reset success.note:when reset the repeater,all your setting will be clear,you must set the repeater again.
<br />
<br />Q:Why my PC cannot search the wifi?
<br />A:please check as follow:
<br />1,if your pc is laptop,please your wireless network card was working status.(reference your laptop manual)
<br />2,please check the password you enter in setting guide image 4 was right.
<br />3,look over your device manager and check your network card device was  install and it is worked,method as follow:Right-click on the desktop "My Computer", select "Properties - Hardware - Device Manager" in the device list, the network card in front of the green logo that the network card driver has been successful and start, if the card in front of the icon has a red fork , Said the card is not activated, right-click the card, select the start, if the icon in front of the card has a "?" Or "!", Said NIC driver is not successfully installed, re-install the network card driver, if not found Wireless card, right-click any icon, select "Scan to detect hardware changes", or re-install the network card.
<br />4,Check if the wireless service on the notebook is on. (Window 7): Right-click on the desktop "network", select "Properties" in the left column, select "Change Adapter Options", where you can view the network card device on the computer, if the wireless card is disabled, Click the icon to select On.
<br />5,Make sure that the repeater's wireless feature is turned on and the SSID broadcast is enabled
<br />6,Try to close the wireless signal and check it can be searched to avoid too many obstacles caused by a serious signal attenuation
<br />7,Try to connect to the repeater using a different wireless network
<br />8,Reset the repeater.
<br />
<br />Q:Why my PC can search the wifi but cannot connect it?
<br />A: Check as follow:
<br />1,Make sure that the name of the wireless network you are trying to connect to is the same as the SSID of the repeater settings
<br />2,Check the strength of the wireless signal. If the signal is weak, it is recommended to adjust the position of the repeater or the proximity connection
<br />3,Make sure the repeater is set for encryption. If the encryption is set, check whether the encryption settings of the wireless card and the repeater are the same.
<br />4,Delete the original configuration file of the wireless card on your computer and reconnect
<br />5,If you are still unable to connect, reset the repeater to the default settings and reconfigure it
<br />
<br />Q:Why my PC can landing 192.168.10.1,but smartphone cannot?
<br />A:Some browsers fail to resolve IP access and are recommended to replace the browser