Item Descriptions:

Features

● It is a number base that produces stylishly at a tilt angle of 5 degrees.

● Tapered top gives you a sense of unity with the bumper.

* The number base can be painted according to the car with a commercially available color spray.

● Protect the license plate from bending and distortion.

● It is a common car and mini car combination.

● It is only for the front number.

Before purchasing

It can not be installed in the following number.

- A model with a number base · stay etc. which is genuine and fixed with bolts other than bolts.

● Large vehicles such as trucks.

● Character type license plate.

* The thing that the license plate is deformed.

※ There is no car around the front license plate.

(2 mm or more at the top, 20 mm or more at the bottom, 7 mm or more on the left and right)

● Can not be mounted on the rear license plate.

● The car may be scratched when installing or removing this product.

Please note.

● Do not use if the vehicle's total length protrudes by 30 mm or more due to installation of this product.

● If the letters / numbers on the license plate can not be confirmed from the front, there are cases where it does not go through subjects of enforcement or vehicle inspection.

Please be sure to check visibility from the front.

● If you attach an angle to an extreme number, please refrain from using it.

please note

* If the tightening of the bolt is weak, there is a danger of falling, so fix it securely.

* After installation, please retighten bolts periodically (every 500 ~ 1000 km).

Please be careful especially after running on a bad road.

Because it is very dangerous to loose and fall, please frequently tighten up again.

● After using this product, if there is a difference with the vehicle side before use (breakage · discoloration · scratch mark · alteration) we can not bear responsibility / compensation at all.

● Do not modify or process this product.

This product and vehicles etc. may cause breakdown or accident.

● After installation, please periodically tighten the bolts regularly (every 500 ~ 1000 km).

Please frequently tighten up again.

(It is very dangerous if it falls loose)

● We do not assume any responsibility including damage to the vehicle side.

● After car wash, just wipe the water drop with a cloth.

Especially wax with compound and cleaner with solvents will damage the product so please never use it.

● When painting on the number base, please use a color spray that can be painted on a commercially available ABS resin.

Please paint according to instructions of color spray.

● This product is for car only.

It can not be used for other purposes.

● The picture on the package surface is an image (installation example).

● Please do not use when there is trouble in normal running.

* We are not responsible for any accidents, breakdowns or damages caused by incorrect installation, disassembly or remodeling if not following these precautions.

Features:

• Producing countries: China
• It is a number base that produces stylishly at an inclination angle of 5 degrees.
• The tapered top gives you a sense of unity with the bumper.
• ※ Number base can be painted according to the car with a commercially available color spray.
• It protects the license plate from bending and distortion.
• It is commonly used as a mini car.
• It is only for front number.

Product information:

Shipping Weight: 263 g

Package Dimensions: 3.91 x 24.00 x 40.49 cm