Studio : Wondfo

Publisher : Wondfo

Binding : Health and Beauty

Product Description
INSTRUCTIONS: 1. The Wondfo Pregnancy Test can be performed at any time of the day; however, testing first morning urine is preferable. 2. Urinate into a clean, dry cup or container. 3. Remove the testing device from the foil pouch by tearing at the notch. Hold the strip at the colored end. (Do not touch the arrow end; do not touch the test window/the middle part of the strip) 4. Holding the strip vertically, immerse the end of the strip with the arrows into the specimen. Do not immerse past the MAX line. 5. Take the strip out when the sample has migrated to the test window (at least 5 seconds). Lay the strip (MAX side facing up) flat on a clean, dry, non-absorbent surface. READING YOUR RESULTS 1. While you are waiting for your result, you may notice a colored solution moving across the test strip. This is normal. You need to wait at least 3 minutes to confirm the result. The test SHOULD NOT BE EVALUATED AFTER 30 MINUTES. The exact color of the line is not important. 1 Line = Not Pregnant If only 1 colored line appears as the control line, the test is negative and you can assume you are not pregnant. 2 Lines = Pregnant If 2 colored lines appear, 1 as the testing line and 1 as the control line, the test is positive and you can assume you are pregnant. Even if the lines are very light in color, you can still assume you are pregnant. Invalid Results: If the control line does not appear, the test is invalid. Invalid results may be an indication that the test strip was not thoroughly saturated in urine. In this case, re-dip the test for at least 5 seconds and wait at least 3-5 minutes to read results. If there is still no control line, the test is invalid and you should retest the following day. Each test is designed for a single use and should not be reused.
0