Product Description
The ro pure plus reverse osmosis system consists of four separate stages. Stage #1 - five micron sediment filter that traps particulate matter like dirt, rust, and silt that will affect the taste and appearance of your water.Stage #2 - five micron pre-carbon block filter that helps ensure a greater reduction of chlorine and other materials that cause bad taste and odors. (The first two stages are called pre-filters because they filter in front of the reverse osmosis membrane). stage #3 - the 50 gpd membrane is the heart of the reverse osmosis system. This Semi-Permeable membrane will effectively reduce tds (TOTAL dissolved solids), sodium and a wide range of contaminants such as lead, arsenic, percolate, chromium, copper and radium. It will also remove over 99.95% cysts such as giardia and cryptosporidium. Stage #4 - one micron VOC (volatile organic compound) carbon filter (105381). drinking water enters this filter after the water storage tank and it is used as a final polishing filter.It is important that this system is properly installed and maintained with an incoming water pressure of 40 to 80 psi for it to operate as designed. The filtered water passes through the membrane and enters the storage tank. When you're ready for a taste, it will leave the storage tank and pass through this fourth stage on its way up to the faucet. The end result crystal clear, high quality, and great tasting water! in the box: ro pure reverse osmosis module (pre-installed filters), parts bag, 3 gallon storage tank, faucet with parts bag and installation instructions (manual).Feature
Reverse osmosis filtration system: reverse osmosis systems reduce particles in the water down to the molecular level. The same process is used by major bottled(ing) water companies. The process of reverse osmosis reduces salts and other impurities, giving you high quality, clear, and great tasting water