Instructions for Installing the Replacement Touch Screen of iPhone:
Things You´ll Need:SIM removal tool, Phillips screwdriver, Pry stick, iPhone 4 touch screen digitizer

1. Turn off your iPhone, insert one end of the SIM removal tool into the small hole at the right side of the iPhone. Push the end of the removal tool into the hole until the SIM tray pops out a little from the lid. Pull the SIM tray out and set it aside.

2. Then use the Phillips screwdriver to remove the two screws surrounding the dock connector on the bottom of theiPhone. Flip the device over so it is face down on your work surface.

3. It is easy enough to push away the back cover after remove the screws. Please push away the back cover upward. Then, we will remove the battery.

4. Next, we will remove the EMI electromagnetic shielding case. There are dense components after removing the 4 fixed screws.

5. We would still remove the other EMI electromagnetic shielding case located in the middle of phone and the inner flex cable. All of these need to pry up carefully with the special designed tool. Please pry up the flex cable in the iPhone 4.

6. There is a small part fixed with screws on the upper right corner, it´s vibration motor of iPhone.

7. We should remove screws and cables before dismounting the main board, and take down other iPhone´s parts, such as camera, loudspeaker and so on. Pry up the connective parts on the iPhone 4 and take down the camera.

8. Remove the larger module on the bottom and it´s a loudspeaker module.

9. Then take down the main board of iPhone 4.

10. This is a second microphone and VGA camera.

11. Then we could pry up the front panel.

12. Due to the complexity of iPhone structures, the screen of iPhone 4 compact with its panel,it is hard to seperate them, suggest you that seek the professional for dismantling your phone, otherwise it may be easy broken.

DescriptionIs your 3G iPhone screen cracked or digitizer having problems? Don´t let it get you down. This is the part you require if you have damaged the front glass on your iPhone 3GS and it has cracked, or if the touch screen digitizer is not responding to any input whatsoever. It is made of high quality and durable material for long time use. It is a good choice for you and easy to DIY with the tools.

FEATURES

High QualityReplacement Touch Screen Digitizer for iPhone 4
Each screen is tested before shipping and working
Repair / Replacing old, broken, cracked, damaged faulty touch screen

Package Includes

1 x Touch Screen Digitizer Replacement with Bezel Frame for iPhone 4 GSM Version Black

Extra Info

Note

Please make sure that the product is installed by professional, otherwise, you may damage the touch digitizer,LCD display screen and flex cable when disassembling or installing the product.Due to the complexity of iPhone iPad iPod structures, suggest you to seek the professional for dismantling and installing your phone, otherwise may be easy broken it.We´ll not bear the loss of incorrect installation and purchase ,thanks for your understanding.