MOTHERS PROFESSIONAL FINISHING POLISH

Mothers Professional Finishing Polish works with your favourite buffer to safely and effectively remove compounding scratches, towel marks, swirls, hazing, holograms, and other imperfections from all paint typses. Once complete, you're left with a brilliant color, enhanced gloss, unmatched depth and a perfectly prepared surface, ready for waxing.

Directions: Shake well before and during use. Finish should be clean, dry and cool.

FOR GLOSSY PAINTS ONLY. Do not use on amtte, flat or satim paints. Avoid cloth, vinyl, plastic, rubber, trim and other unpainted porous surfaces.

1. If applicable, set buffer speed at medium to medium high.

2. Dispense a 5 inch ribbon of polish onto a polishing pad or finishing pad or bonnet. Start machine slowly to minimize slinging.

3. Using a light pressure, work an area approximately 2 square feet, overlapping the path by 50% in at least 3 directions.

4. Clean ad or bonnet as needed to reduce clogging. 

6. Wupe surface clean with a softm dry microfiber or terry cloth towel.

7. Follow with your choice of the many quality mothers waxes.

Important: Remove excess or apttered polish with a soft damp cloth beofre moving to the next area to be buffed.

ALWAYS USE APPROPRIAATE PERSONAL PROTECTION EQUIPMENT.