The Detrum Istone Pro is a 6-axis Gyro & Stabilizer for airplane. It is suitable for normal wing， fly-wing， and V-tail airplanes with normal mode， gyro mode， aerobatic mode and auto balance mode. When switch other modes to the auto balance mode in an emergency， the airplane will recover to the lever flight automatically， which is known as one-click rescue.
.jpg)
.jpg)
.jpg)
Features:
High-performance 32-bit ARM core processor， 6-axis sensor chip.
Self-developed attitude estimation algorithm and attitude control algorithm.
Support normal wing， fly-wing， and V-tail airplanes.
Support 3D aircraft.
You can change the flight modes quickly by switching the channels during flight.
There are four intelligent flight modes: normal mode， gyro off mode， aerobatic mode and auto balance mode.
It can be programmed by pressing the button and checking LED indicators， the sensitivity for three axes can be independently adjusted.
Support Futaba S.BUS / PWM input.
Super small size， support forward， backward， and side mounted.
Added auto balance mode， when operating in this mode， the airplane will maintain level flight automatically. Suitable for the new beginners or the FPV applications.
Specifications:
Brand Name: DETRUM
Item Model: Istone Pro
Main Controller: 32-bit MCU
Sensor: 6-axis gyro
Input Voltage: 4.8 to 7.4V
Gyro Scale Range: -2000dps ~ +2000dps
Accelerometer Scale Range: -4g ~ +4g
Input Signal: PWM， Futaba S.Bus
Output Signal: PWM (71.4Hz)
Operating Temp: -20 ? ~ 70 ?
Size: 36.5 * 29.4 * 12.4mm
Weight: About 10g
Package information:
Package size: 8.5 * 6.5 * 3cm / 3.3 * 2.6 * 1.2in
Package weight: 52g / 1.8oz
Gift box package
Package list:
1 * Istone Pro 6-Axis Gyro & Stabilizer
1 * 3-signal Wire
2 * Anti-shock Double Sided Tape
1 * Single-signal wire
1 * English Manual
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
.jpg)
.jpg)
.jpg)
