Features:
New upgrades to simplify?∨ meeting the users' needs.
Increase the power supply anti-reverse function.
The use of opto isolated input and output?∨ enhanced anti-jamming capability and consumption.
The last setting parameters can be memorized after power off.
Signal terminal voltage signal can be maintained for a long time.
To ensure stability?∨ industrial grade PCB board.
Notice:
Relay output is passive contact without charge output?∨ and it control the on and off of the line.
Working modes selection: after power on?∨ long press K1 for 2s?∨ later into the selection of modes: P1~4; K2 to enter the mode.
P-1: Monostable trigger delay?∨ a signal to trigger relay?∨ time is up?∨ the relay disconnect;
P-2: A signal trigger and countdown begins?∨ T1 seconds after?∨ the relay open T2 seconds?∨ then close;
P-3: Open T1 seconds?∨ disconnect T2 seconds?∨ infinite loop. Users can set the relay time T1 and T2;
P-4: The relay opens when a signal triggers?∨ when the trigger signal disappears?∨ digital countdown begins?∨ and the relay closes when the time is up.
Specifications:
Timing Range(Settable): 0.1~99.9 seconds; 1~999 seconds; 1~999 minutes
Working Voltage: DC 12V
Signal Voltage: DC 4~20V
Output Capacity: Can Control the Load within DC 30V 5A or AC 220V 5A
Static Current: 20mA
Working Current: 50mA
Working Temperature: -40-85??C
PCB Size: 64 * 35 * 18mm / 2.52 * 1.4 * 0.7in (L * W * H)
PCB Weight: 25g / 0.89oz
Case Size: 68 * 40 * 2 2mm / 2.67 * 1.57 * 0.86in (L * W * H)
Product Weight(With Case): 42g / 1.49oz
Package Size: 11.5 * 7 * 2.2cm / 4.53 * 2.75 * 0.86in (L * W * H)
Package List:
1 * Delay Timer Module with Case"
