Studio : Ysyg

Publisher : Ysyg

Binding : Electronics

Product Description
Specification:
Range: 50 miles with amplifier
Connectors: F Male
Voltage: 5V
Power supply connector: USB
Coaxial Cable: 13ft length
With multi-directional design, you can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital HD shows with many opportunities.

Fast and easy to set up:
1)Connect to ANT/IN on the back of any digital HDTV.
2)Place this antenna in an optimal position, usually on a wall or window.
3)Scan Channels by selecting 'Menu' then 'Channel Search' and you are ready to enjoy your favorable TV programs.

Package list:
1x HDTV Antenna with 13ft coaxial cable
1x Amplifier
3x Stickers
1x Instructional Manual

If your digital TV antenna is not working as expected, please try the following steps:
1.Check to make sure you have correctly connected the digital TV antenna to your HDTV or third-party HD receiver.
2.Re-scan for channels. In the TV's setup menu, set the tuner mode to "Antenna" or "Air". Refer to the TV manual for more detailed instructions.
3.Reposition the indoor TV antenna in a different location. Placing the antenna higher on a wall or close to a window may result in better reception.You must rescan whenever you move the antenna.
4.keep the TV antenna away from those big power consumption devices interference, such as air conditioner, refrigerator and microwave oven,etc.
5.This is an amplified HDTV antenna. If a signal can not be received with the external amplifier, remove the amplifier and try again.
6.Making sure you are using a HD receiver, otherwise no HD channels can be picked up.


0