★Item Name★
Sanwa Direct HDMI switcher 4K2K corresponding 3-input 1 with the output remote control with PS4 corresponding automatic switching without power required USB power supply cable 400-SW019
★Item Description★
It is HDMI selector that corresponds to the 4K TV (※ 3,840 corresponding to 4K / 30p signal of × 2,160). A beautiful image to be displayed from the high-performance playback device as it is, you can connect and play multiple instruments. When you want to turn to use multiple devices in and 1 port when the TV's HDMI port is not enough, you can share the three devices. Dolby True supports HD and DTS HD Master Audio. Ready to use by simply connecting the output device and the playback device such as a television with an HDMI cable. It is with a remote control that can be switched be separated from the body. With so remote control receiver, you can remote control is also set up a body to the TV back. Since hide the cables to the back, it can be used in a state in which the TV around was refreshing. There is no automatic switching function by the power supply ON · OFF of equipment, switching is a complete manual switching specification to select a playback device only at the change-over switch, the remote control of the body. No malfunction, can be used safely. With a USB power supply cable, it can also be avoided by USB power supply, such as interruption or disturbance of the image due if the power supply shortage. Even bus-powered by the power supply from the HDMI device supports (for a more stable operation ※, we recommend the connection and use of USB power supply cable). Compact size that does not get in the way. Since the input terminals and output terminals are on the same side, without cable pops out before, you can clean wiring. On the back, it comes with a non-slip rubber material (※ body, is by a very lightweight for wiring is pulled in the cable, there is a case that floats). To all of the HDMI ports are gold-plated, strong to rust, it prevents the poor contact.
■ Size: W115 × D60 × H21.4mm / about 80g
■ Material: ABS resin
■ interface:
input / HDMI type A (19PIN) female × 3
output / HDMI type a (19PIN) female × 1
■ switching scheme: body-switching button, the remote control
■ switching content: HDMI input / 3, HDMI output / 1
■ maximum resolution: 4K2K ( 4096 × 2160)
■ major corresponding resolution:
4096x2160 / 30Hz (4: 4: 4), 3840x2160 / 30Hz (4: 4: 4),
3840x2160 / 30Hz (4: 2: 2 ), 1920 × 1200 / 60Hz, 1920 × 1080 / 60Hz
※ 4K2K is 60Hz refresh rate driven in resolution output incompatible
■ data rate (maximum): 3.0Gbit / s
■ pixel clock : 300 MHz (maximum)
■ input DDC signal: 5V
■ HDCP: HDCP1.4 corresponding
■ inter-device control (CEC): corresponding
※ guarantee the operation in all devices No
■ power consumption in: 1.2W
■ environmental conditions (non-condensing):
operating temperature / 0 ~ 50 ℃
storage temperature / -20 ~ 60 ° C.
Operating Humidity / 80% or less
Storage humidity / 80% or less
■ Accessories: Remote control (battery included / CR2025) × 1, IR receiver cable (cable length about 1.45m) × 1, USB cable (power supply / cable length - about 69cm) × 1
■ Country of origin: China ■ instruction manual: Yes
■ warranty: 6 months
from the date of purchase
■ compatible devices: regarding
HDMI output terminal standard equipped to have the video equipment and home-use game machines and personal computers
the ※ the 2016 launch PS4 corresponding,
2016/9/15 launch of the compact and lightweight model, and 2016/11/10 for the launch of PlayStation? 4 Pro, will not support because it is in operation verification.
■ corresponding output device:
HDMI input terminals such as TV, PC display projectors that are standard with
※ non-compatible with 60Hz refresh rate driving at a 4K2K resolution output < br> ※ does not guarantee the operation in all of the equipment
■ recommended cable length:
to HDMI equipment - switcher / 3 ~ 5m
switch-display up to / 3 ~ 5m
Please note:
※ at the time of switching in the 4K2K resolution, please use the 4K2K corresponding HDMI cable.
※ HDMI cable, USB-AC adapter is not included. Please prepare separately if necessary.
※ total distance that can extend output at 4K2K resolution is very different in the HDMI equipment and display of performance and connection environment.
※ HDMI equipment connection, remove please go turn off the always power when (or disconnecting the cable). Recognition failure and output settings failure, it may cause damage to the equipment.
※ by HDMI equipment may be required to recognize the display at startup. In that case, you will need start-up of the HDMI device from the switch the port.
