Studio : Adarl

Publisher : Adarl

Product Description
First, install the battery
Second, open the safe with a password door
The default password for Vault is 0000.
1, enter the 4-digit password, the password above the keyboard will have a green light, if you enter the wrong password, then the red light will
be issued and will issue a "PLEASE TRY AGAIN" sound to tell you.
2, clockwise rotation knob, pull the door. When the green light is on for about 10 seconds, you will hear a squeaky opening sound. If the door
is open for more than 10 seconds, the green light turns off and beeps once every 20 seconds. To stop the beep, close the door.
Third, modify the password.
1, enter the current password (default 0000) to open the safe door.
2, long press "*" button and hold, green and red flashing.
3, in 15 seconds to enter the new 4-bit password, press "#" to confirm the store new password. The two lamps stop blinking.
4. Release the "*" key and close the door.
Fourth, storage coins and banknotes
1, the coins above the coin mouth into the safe;
2, the paper money from the top of the special deposit into the mouth, only when the safe door closed when the money can be automatically
involved (the notes into the paper money deposit, only gently against the mouth of the switch, the green light will light up , The paper money
will be automatically involved in the deposit box, if the card currency, red light will be lit and spit out the paper money, after the
red light off to enter the password to open the safe).
Tip: 1. If the paper money is too old or too soft, it will cause the coin program not to start, then you can only change the notes or open the
safe deposit.
2, if you do not accidentally press the switch to the back of the door, will become a voice mode, the operating procedures or the same, just
slow down, and so on, then press a word can be finished (if a battery removed, the password will become " 0000 ").

0