Solution overcome Dented car, using this tool Your car will be good again instant.tanpa go to ketok
magic that pocketed very large. With Pops A Dent you can do it yourself very easily, and can be used repeatedly. Will Save your money and time.
1. It depends on the size & location of the dent. Pops-A-Dent works with excellent results but you will achieve the best results with a small dent. For a bigger dent you have to repeat the usage in clockwise rotation & repeat until you reach the desired result. Choose a glue pad (available in 3 sizes) that best matches the size of your car's dent.
2.Heat the glue stick no more than 5 minutes for best results. Be careful when handling glue & hot glue.
3. Let the glue dry for about 3-5 minutes, make sure the glue is really sticky. Do not leave the glue pad on your vehicle for more than 8 minutes. If you do not achieve the desired results simply repeat the process. If you accidentally leave the glue pad on the car for more than 8 minutes & the glue pad can not be pulled, shake the glue pad to the left & right until it is released.
4. The ideal temperature range to do your dent removal is 19-29 degrees Celsius. The car was probably too cold & had to be moved to a location that would meet the temperature range. Move the vehicle to the garage / use the hair dryer to heat the surface.
5. POPS-A-DENT glue pads are designed to prevent residual glue remaining on the vehicle surface. If any residue is left on your vehicle or on the glue panel after appointment use isopropyl alcohol to remove it.
6.Pops-A-Dent has a "bridge" shape design that distributes pressure evenly across "bridges" to prevent the risk of additional damage / curvature.