(The principle of using water without putting on the orange part of the motor,
the air does not work because the only exit.)




- Aquarium Vacuum Cleaner Video 01-

- Aquarium Vacuum Cleaner Video 02 -


Without moving the fish, Aquarium and clean,
Can be used without changing the water, eco-friendly Aquarium Cleaner

Major Characteristics of Fish Tank Cleaner "Clean Master SM-500

1.  It powerfully vacuums away debris with strong DC 12V powered under water pump (Pump Life Cycle: 20,000 hrs) 2. Fish Tank Filter removes 99.9 % of debris (Useful bacteria and salt won't be filtered) * Other battery powered fish tank cleaners have weak vacuum capability so that debris will be filtered only about 50% . Therefore, you may see the turbid water inside the fish tank even after cleaning. 3 . Adapter powered (100-240v/12V/1A) product is more convenient to use compare to battery powered products.

Assemby Procedures

Trouble shooting Method for Cleaner

Kinds of Trouble Cause Solution When a pump doesn't run In case that power cord is not connected Connect the power cord completed before running the cleaner In case that the middle switch is OFF Turn the middle switch ON When water doesn't come out but noise sounds In case that there is lack of water in the filter case Fill enough water in the aquarium In case air is filled in the cleaner Drain air while turning the cleaner When sand is heavily sucked up into the Suction Tube during cleaning In case of not using the additional tube connected to the suction tube Use the additional tube connected to the suction tube or reduce water quality by turning the water quantity adjustment head

Cleaner Operation Manual

1. Before using this cleaner, please read this guide and instruction completely 2. Please check that the cleaner is assembled completely (power cord, middle switch, damage) * How to assemble the filter : assembling - Turn it clockwise for assembling Disassembling - Turn it anti-clockwise for disassembling 3. As this cleaner is kind of underwater pump, please put it into water completely before running it. 4. The air is drained out best from this aquarium cleaner at 5 cm to 10 cm below the water surface 5. When sand is heavily sucked into the suction tube during cleaning, please use the additional tube connected to the suction tube or reduce the water quantity adjustment head * When cleaning is finished, Please disassemble the cleaner and wash the filter with shower and dry it in the shade. * As soon as the aquarium cleaning is completed, please turn off the middle switch and immediately move to other places for cleaning

How to Use

In case of enough water in the Aquarium Switch off the cleaner and then put the cleaner into the water of the aquarium as shown in Fig.1 After air is drained out completely, turn on the middle switch and start cleaning. In case of insufficient water in the Aquarium Switch off the cleaner and the put the cleaner diagonally into the water of the aquarium as shown in Fig.2 * After air is drained out completely by turning to right and left, turn ON the middle switch and start cleaning.

1. I am new to this product. Is this cleaner effective?

Answer: This is world's first invention. And yes, it's effective.
Other product's filter can be used only once under the water but our filter can be used 3~5 times
Our filter is made more effective than others

2. Moderate Level of absorbtion.

Answer: Our product uses moderate level of absorbtion power so that sand won't be absorbed
Having too strong motor power will absorb sands and debris together.
We only absorb debris and then refine the water.
It may look weak in absorbtion.
we uses 12V adaptor to control the absorbtion level so that
it only absorb the debris not sand.
We could have used 15V adaptor but this may cause the stronger absorbtion
which will lead to absorb the sand and debris together.
Consequently, filter will be filled with sands and not operate properly.

3. Would it be possible to use stronger absorb power?

Answer: Sure
You may purchase 15V adaptor insteady of 12V which we have included.
15V adaptor will increase absorbtion level which will lead to absorb of sand. so, you must
adjust the water quantity adjustment head (located on orange color Motor).
Doing so. it will reduce the quantity of water suction.
(if you often the Water Quantity Adjustment Head, it will increase the quantity of water suction.
(we deliver the product with Water Quantity Adjustment Head open)

 

4. It seems weak in absorbtion of sand and debris
Answer: It may look weak in absorbtion but its adequate level absorbtion will filter
bad debris and keep the good element for the fish. Our technology makes it possible.

 

 

 

5. What to do if sand is absorbed?
Answer: The filer and cleaner may not operate properly when sand is absorbed due to the stronger level of power.
So, keep avoid the absorbtion of the sand. Adjust the absorbtion level of water by turning the head of Water Quantity Adjustment Head.

 

6. How long can I used the filter?
Answer: In case of 120L fish tank size, filter can be used 3~5 times.
Smaller size tank, you may use longer than 3~5 times.

7. How to reuse the filter?
Answer: After filter is used, wash it with shower and dry under the shade. then reuse it again.

8. How long can I operate cleaner?

Answer: It's safely designed to use 24 hrs
But filter may use 3~5 times

F.A.Q will be updated continuously.


If you want Compatible with each other 4 Filter Set
"Aquarium Cleaner 4 Filter Set"

Buy it Now Price!!
please click here!!