MICROBE-LIFT pH DECREASE

Safely lowers pH levels

When used as directed:

• Safely lowers pH levels
• Is not harmful to aquatic life and plants
• May cause some brief cloudiness depending on water quality

Directions

• Test pond water the same time each day (dawn=lowest pH; dusk=highest pH) for a pH reading above 8.5.
• Most ponds targe a 7.5 pH with an alkalinity level between 100-200 ppm (normal range).
• Add 1 oz. per 375 gallons for pond water for every 1.0 pH unit change desired.
• Apply in several steps and measure change in the pH before next addition.
• If your pond contains fish and/or plants, do no dramatically change your pH levels more than 0.5 pH unit in a 24 hour period, as not to shock aquatic life and/or fish.

Combines:

• Two pH adjusters for buffered effectiveness
• Three electrolytes to help maintain osmotic balance
• One slime coat ingredient for skin protection and stress reduction

Note: With all pH adjusting products, the alkalinity level (water hardness) should be adjusted to a normal range (100-200 ppm) before any effective and stable pH adjustment can be made.

Make recommended application in several steps to avoid over-adjustment and pH bounce.


Cautions

• Keep out of the reach of children.
• Follow directions carefully.