Off-white drying epoxy sets in 5 minues and cures in 1 hour
Great for most hard plastics, ABS, fiberglass, pvc, glass, vinyl and most composites
Tensile strength of 3200 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won''t dry out
J-B Weld is proudly made in the USA
Hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types
Great for rigid and semi-flexible plastic, abs, pvc and cpvc pipes, automotive trim, bumpers and more
Sets in 25 minutes, cures off-white in 3 hours - does not adhere to polyethylene, polypropylene or some other plastics
Once cured, it can be sawed, drilled, carved, sanded and painted and is rated at a tensile strength of 350 PSI
Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
Bonds instantly
Superior strength
Will not shrink or pull away
Rebuild automotive trim, fiberglass parts and vinyl siding

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 4.02 inch
Height : 0.2 inch
Length : 7.99 inch

Item Weight: 3.52 ounce (View shipping rates and policies)
Shipping Weight: 2.4 ounce (View shipping rates and policies)

ASIN : B003S2E4UE

Product Description

PlasticWeld is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of 3200 PSI and cures to an off-white color. Use on: Automotive Ceramic Epoxy and Adhesives Fiberglass Plastic/Composite/PVC And more Instructions 1. Prepare: Clean repair area of dirt, grease, oil, paint, rust, etc. 2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly. 3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed. 4. Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees fahrenheit, then set time is longer.