STAINLESS STEEL BEVERAGE DISPENSER REPLACEMENT SPIGOT

FEATURES

  • Stainless Steel Beverage Dispenser Replacement Spigot(Polished Finish)Wheelock
  • Needs 5/8 inch or 16mm diameter opening to install. For flat surface
  • can fit up to 1 inch hole. (For 1/2 inch opening)
  • Stainless Steel Constructions Acid Resistant No Lead
  • Package Content: 1 stainless steel spigot, 2 stainless steel washer, 2 silicon gasket, 1 stainless Steel nut.

SPECIFICATION

Model No.3495
Product Size0.5 Quart
Package Dimension6.86 x 3.56 x 10.67 Cm
Package Weight0.18 ~ 0.22 Kg
Product GroupKitchen
AvailabilityAvailable (Usually ships in 1-4 business days)

DESCRIPTION

Before installation,Wash and Rinse in soapy water is suggested Remove the nut, and one set of washer, gasket from the spigot Insert the spigot to the dispenser Install the gasket and washer Tight the nut. Usually hand-tight is good enough to create a water tight seal. You can also use 3/4 in wrench. Do not over-tighten, it could crack the dispenser made of fragile material like glass or ceramic. After each use, rinse thoroughly with clean water with handle in partial open position(45 degree turn) Package Content: 1 stainless steel spigot, 2 stainless steel washer, 2 silicon gasket, 1 stainless Steel nut.