This dog training collar operating by a transmission and a receiver has 4 four modes to control and train your pets. Easy to connect the transmitter with collar receiver, 100 levels of vibration & static shock and is adjustable of the level. Large range of remote control range which up to 300 meters.
Features:
300 meters remote control range.
100 levels of vibration & static shock.
4 working modes: static shock, vibration, sound and flash.
The levels can be altered by pressing the up & down button.
Easy to connect the transmitter with collar receiver.
The collar length can be adjustable from 14 inches to 22 inches.
Water-resistant collar receiver.
Transmission and receiver with built-in lithium rechargeable battery (500 mAh).
Compact and rechargeable, ergonomics design, portable and comfortable.
Connect the Transmitter with the Receiver:
1) Turn on the transmitter and choose channel Y to encode. (Y2 for another receiver(not included)to control other dog).
2) Remove the rubber cover in the receiver.
3) Use a toothpick or small stick and insert into the switch hole of the receiver, then you will hear a beep sound.
4) Press the Y button on the transmitter within 1 minute while you will hear another beep from the receiver, which means they are connected.
6) After completion, put the rubber cover in the right position to keep the internal unit from dust and water.
Charge the Transmitter:
1) Connect the charger connector to the charging jack.
2) Plug the charger into a standard outlet.
3) The red light on the Transmitter will be lighted.
4) Charge the Transmitter about half an hour.
How to Use the Transmitter:
1) To turn on the transmitter, press the mode button on the transmitter for 5 seconds.
2) By pressing the Mode button to change to different modes and press the Y button to choose the mode you want.
3) Press the up and down buttons on right side to set level.
4) Choose the different channels for different receivers (only one receiver included).
5) The transmitter will go into standby mode if not operated for 2 minutes.
6) In standby mode, shake the receiver to wake it up.
Charge the Receiver:
1) Connect the charger connector to the charging jack.
2) Plug the charger into a standard outlet.
3) The red LED light inside the collar receiver will turn on.
4) Charge the collar receiver about half an hour.
5) When charging is completed, put the rubber cover in the right position to keep the internal unit from dust and water.
Specifications:
Transmission frequency: 433-825MHZ
Working mode: static shock, vibration, sound and flash
Transmission battery: Built-in 500 mAh
Receiver battery: Built-in 500 mAh
Input voltage: 110-240V (US plug)
Package size: 19.5 * 14 * 4.5cm / 7.67 * 5.51 * 1.77in (L * W * H)
Package weight: 268g / 9.46oz
Package List:
1 * Remote control transmitter
1 * Receiver
1 * Collar
1 * Charger & cord
1 * Test light & replacement probes
1 * Operating instructions (English)