JEEGY SMART BLUETOOTH ALRAM Positioning Trace Lock Keep Bag bicycle from Theft
* Feature
1. Smart blurtooth position Alram ( keep bag in travel, bicycle on riding, my smartphone  
2.Convenient Small size : 65 * 23 * 12 mm 50 G
3.Position tracing & bluetooth two way alram ( MAX 70 M Smartphone - Jeegy )

Specification
- Operating Range : Maximum 70m (at open space)
- RF Protocol : Bluetooth 4.0(Bluetooth Low Energy)
- Frequency Range : 2.402~2.480GHz
- Frequency Channel : 40 channels
- RF Power : 10mW(0 dBm, When it does not use Amp.)
- Modulation : GFSK
- Battery : Li-polymer rechargerble 145mA
- Current : Active: 100mA, Sleep: less than 300uA
- Weight : 50 g
- Size : 65 x 23 x 12 mm (2.6" x 0.9" x 0.5")
- Water Proof : Waterproofed for livelihood(in the silicon case)
- Battery duration : 35 hours( at sleep)
- Operating Condition : Temperature: -10~50’C, Humidity: 30 ~ 75%
- Storage Condition : Temperature: -10~50’C, Humidity: 75%  
- Origin : made in korea






How to USE 
1. Download jeegy application
Search tip : "jeegy" at Google play and Apple App store (Above Android 4.3, IOS 8.0)
2. Press the power button for 1~2 sec.
The LED blinking is shown as the power is on.
In case of the situation that the LED is blinked 3 times and the power is off, It means that you need to charge the device.
3. Attach the device on the proper place under the bicycle saddle or precious things bags, after connecting its application with your smartphone. Refer to  of user’s manual in application.
Touch sensor LED
Under the anti-theft mode, it makes a loud alarm and the LED flickers for 30 seconds at the same time when the device detects some movement or shock.
Power display LED
It blinks at 1-second intervals while the device is working
Charging LED
It turns into the green LED when it is fully charged
Button to find smartphone
When you press ‘button to find smartphone’ during device and smartphone connected, smartphone will ring alarm. If device in not connected with smartphone, 2 LED will blink for a second.
The power button
When you press power button for a second, 2 LED will be turned on with blinking
- The power will not be turned off during device and smartphone connected. If you press power button during device and smartphone are connected, LED will blink for a second.
- If you press power button for a second during device and smartphone are not connected, 2 LED will blink 3 times then be turned off.