The Detrum Istone DSM (ISTONE-AII) is a 6-axis Gyro & Stabilizer for airplane. It is suitable for normal wing， fly-wing， and V-tail airplanes with normal mode， gyro mode， aerobatic mode and auto balance mode.
Warm notice: The parameters of the Stabilizer must be set via Detrum 3in1 programming card.
The Detrum 3in1 programming card is not included.
.jpg)
.jpg)
.jpg)
Features:
It supports normal PWM receiver， DSM2/DSMX receiver and Futaba S.BUS receiver. The priority of the signal is: DSMX > S.BUS > PWM.
High-performance 32-bit ARM core processor， 6-axis sensor chip.
Self-developed attitude estimation algorithm and attitude control algorithm.
Support normal wing， fly-wing， and V-tail airplanes.
Support 3D aircraft.
You can change the flight modes quickly by switching the channels during flight.
There are four intelligent flight modes: normal mode， gyro off mode， aerobatic mode and auto balance mode.
The parameters must be set via Detrum 3in1 the programming card， including mounting direction， wing type， flight mode， level offset and the gain.
Super small size， support forward， backward， and side mounted.
With auto balance mode， when operating in this mode， the airplane will maintain level flight automatically.
Specifications:
Brand Name: DETRUM
Item Model: Istone DSM (ISTONE-AII)
Main Controller: 32-bit MCU
Sensor: 6-axis gyro
Input Voltage: 4.8 to 7.4V
Gyro Scale Range: -2000dps ~ +2000dps
Accelerometer Scale Range: -4g ~ +4g
Input Signal: PWM， Futaba S.Bus， DSM
Output Signal: PWM (71.4Hz)
Operating Temp: -20 ? ~ 70 ?
Size: 36.5 * 29.4 * 12.6mm
Weight: About 10g
Package information:
Package size: 8.5 * 6.5 * 3cm / 3.3 * 2.6 * 1.2in
Package weight: 54g / 1.9oz
Gift box package
Package list:
1 * Istone DSM 6-Axis Gyro & Stabilizer
1 * 3-signal Wire
2 * Anti-shock Double Sided Tape
2 * Single-signal wire
1 * English Manual
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
.jpg)
.jpg)
.jpg)
