* The main material is made of environmentally friendly rubber wood and plywood.
* The bed board is made of solid wood frame with PS2 board， and uses 3 strengthening beams to strengthen the endurance under the board.
* Bed can be four-stage adjustment.
* One-sided railings have two lifting design.
* With one-piece zigzag handle and two well-designed safety locks to ensure the safety of lifting railing.
* Supports the hardware components of the bed with 3D structure design to increase the support point， and let the metal parts and bed frame closely， do not have to worry about the bed may suddenly fall， causing the baby dangerous.
* Both railings are attached with non-toxic bite， so that the baby most like to explore the world with your mouth is protected!
* Use of non-toxic lead-free paint materials to protect the health of your baby.
* 6 lacquered surface treated fine.
* Can be used as a shaker， the beautiful arc design also adds to the appearance of beauty.
* Baby cot is about four years old， the maximum weight 25kg (when lying).
* Crib non-game bed， do not let the baby jump in the crib.
* When using the swing function， the crib must be accompanied by an adult and can not be reused if the baby has been turned over.
* Baby crib is made of wood， it will absorb the air or baby sweat， diaper moisture， please use the mattress for a period of time， remove the ventilation or placed in the sun exposure.
* Please check the crib at any time if there is loose wire phenomenon.
Single bed number: BB43104WR
Mattress Item: BB48041
Product inspection report can be found at: {PRODUCT KNIT} Anti-bite / paint
Product Specifications:
Outer diameter size: 68X126XH106cm
Diameter size: 61X121XH106cm
Mattress size: 61X121X5.8cm
Origin: Vietnam
IMPORTANT! RETAIN FOR FUTURE REFERENCE， READ CAREFULLY.
WARNING:
a.Be aware of the risk of open fire and other sources of strong heat， such as electric bar fires， gas fire， ect. In the near vicinity of the cot.
b.Do not use the cot if any part is broken， torn or missing and use only spare parts approved by the manufacturer.
c.Do not leave anything in the cot or place the cot close to another product， which could provide a foothold or present a danger of suffocation or strangulation， e. g. strings， blind/curtain cords， ect.
d.Do not use more than one mattress in the cot.
BABY COT ASSEMBLY MANUAL
ACCESSORY
A. Iron part for deck (left) * 2 pieces
B. Iron part for deck (right) * 2 pieces
C. Screw for deck (1/4"x1 1/4") * 4 pieces
D. Screw for railing fixing (1/4"x2 1/4") * 4 pieces
E. Wheel * 4 pieces
F1. Cork* 2 pieces (for small crib assembly)
F2. Screw (1/4"x2 1/4") * 2 pieces (for small crib assembly)
ASSEMBLY PROCEDURE
Step 01: Using (D) screw to fix side railing (H)， and lock with bedside (I) and (J)
Step 02: Put removable railing (G) in rectangle notch of bedside (I) and (J)
Step 03: Insert iron part (A) and (B) into the hole of bed side (I & J)， depending proper height
Step 04: Put the bed base flatly on iron part and fix bed board with screw (C)
Step 05: Install wheel (E) under whitegroove of bed foot
Step 06: How to set up small baby crib
- Tearing down removable railing
- Use screwdriver press down plastic latch
- Raise the railing
Remarks: this cot can be mounted with railing， please keep parts F1 & F2 for future assembly.
ATTENTION
* When use the cot， check the lock mechanisms are engaged. Check carefully it is fully engaged before using the folding cot.
* If you leave the child alone in the cot， always make sure that the movable side is closed.
* The cot base can be adjusted to different height， When the child can sit， please adjust the base to the lowest position. When the child can climb， please do not use this cot for safety reason.
* It is essential to remove the rails before the cot is used in its lowest position.
* When the mattress is in the lowest position， the cot inner height (mattress surface to cot upper edge) is min. 500mm. When base is in the highest position， the cot inner height is min. 200mm. The mattress thickness is max. 120mm.
* The mattress's dimension that comes with the cot is 610x1220mm. Therefore， please do not use mattress thickness lower than 580x1180mm
* All accessories must be locked tightly and inspect routine.
CLEAN & MAINTAIN
- Please use non-toxic paint to renew the cot.
- Please do not scrape the cot's paint.
- Please use tender cleaning solution or kid's furniture cleaning solution.
- Please do not use chemical cleaning detergent.