
Summary: Add water in the water tank, close the lid, wait one minute, then plug in the power, turn on the power switch.
PRECAUTIONS & TIPS:
1. Please read the manual carefully before using this product.
2. The product uses voltage DC-5V, make sure the power supply is 5V DC power supply. Can be connected to a computer or use the usb adapter output 5V power supply.
3. Keep the tank clean and unplug the power when washing.
4. Use pure water or distilled water to avoid clogging impurities in the water atomization chip. To add flavor, make sure that the liquid flavor does not corrode the tank.
5. Cleaning is recommended at least once a week, remember not to touch the atomization chip.
6. This product not to be handled by children without adults supervision.
7. Open the lid, add pure water into the tank, and ensure water level is not too high to avoid water overflow.
8. Place the lid on the cover and the tank magnets attract each other tight, press the switch to start the operation.
9. This product works for two hours and will automatically stops, press again to switch back into operation.
10. Long-term when not using the product, keep with the water tank clean, remove the suction swab to dry.
11.This product must not be immersed in water or rinse it under the tap, to avoid damage to the electronic components inside the product.
(Note: After some time of use if developed some fog, it is recommended to use a cotton swab moistened with white vinegar or alcohol to clean the spray film)
12.Always replace the water in the container.