CC2530 ZigBee Development Board With Serial Plate Compatible XBee Interface

Description:

1. Line interface is compatible with XBee (factory default welding pin)

2. SMD interface just as stamps Holes

3. Supporting three kinds of serial transparent transmission firmware: coordinator， router and terminal

4. It supports serial port to send large data of contracting and broadcasting and serial download program (firmware support via the serial port Bootloader; serial module required)

5. Support PC software setting mode， serial channel， baud rate， channel parameters

6. Supports automatic network (requires at least one coordinator and a router to network). Signal strength can be monitored in real-time coordinator and routing between terminals

7. Support PCB antenna and external antenna IPEX

Features:

Master chip: CC2530F256RHAR

Communication distance: up to 130 meters with  onboard PCB antenna (working environment: open area)

Working frequency: 2.4GHz

Operating voltage: 2.0V-3.6V

Temperature range: -40 ℃ ~ 85 ℃

Serial port baud rate: 38400bps (default)， you can set other baud rate

Volume: 26mm x 28mm (PCB)

Here is an introduction of pin:





Package included:

1 x CC2530 ZigBee Development Board 

1 x 40 PIN 

1 x 40 PIN Connectors

1 x USB Cable