This solar water pump makes use of the unlimited solar energy to power your pond fountain. Basing on updated brushless solar technology， it works more efficiently， stably， and much easier to start.

Features:

• Features 1600mAh built-in rechargeable battery for power back-up
• On / off switch at the back of solar panel for added convenience
• Easy to assemble and set up with 3-section pole that can be easily planted into ground
• The solar panel can be tilted to maximize sun exposure
• 3 spray nozzles are included

Specifications:

• Solar Panel Power Consumption: 11V 350mA
• Brushless Pump Power Consumption: 0.8W
• Water Pump Input: DC 7V， 110mA
• Maximum Water Height: 75-80 cm
• Maximum Flow: 160-175L / H
• Nickel-cadmium Batteries: 7.2V 1600mA
• Life: More than 20000 hours
• Solar Panel Size (L x W): Approx. 9.5 x 6.4 inch / 24 x 16 cm
• Water pump Size(L x W x H): Approx. 1.46 x 1.46 x 1.1 inch / 3.7 x 3.7 x 2.8cm
• Cable Length: Approx. 117 inch / 298 cm

Note: When just for charging without working， the power storage could supply for 4-6 hours

When the switch of the product is in the "ON" position， the circuit is in “Charge” mode for 30mins. After the countdown of 30mins， the circuit will detect the voltages of the battery and solar panels. If they meet the “Start-up” requirements， the pump starts to spray. When  placed in the “OFF” position ( It means to turn off the battery files)， the product does not work. You can also block the Solar panels and make the device enter “Power-saving” mode with manual operation， and then open the solar panels. When the battery voltage meets “Start-up” requirements， the circuit is activated， and the pump sprays. If the battery voltage is low， it can only work normally after 30-minute charging.

Note: In the process of boot and use， this product may not spray immediately. After 30-minute countdown， it will start to spray normally. This phenomenon is Normal.

Package Includes:

• 1 x Solar Panel
• 1 x 3-section Pole
• 1 x Water Pump with Cord
• 3 x Spray Nozzles

';