Studio : VCCA

Publisher : VCCA

Binding : Electronics

Product Description

Product Features:

- Material: tungsten cemented carbide.
- Length of Blade: 19mm.
- Blade Diameter: 0.9mm.
- Color: 30°blue cap, 45°red cap, 60°yellow cap.
- The head of the blade is made of Tungsten steel, The body of the blade is made of stainless steel.
- The blade come with a high quality soft plastic protector cover, also with 15pcs spring.
- With carbide materials, ultra hardness, super toughness, more sharper edge with ultra-fine polishing.

Usage Guidance:

- Suitable for mahogany, wood, PVC color board, MDF and other precision relief.

- 30 Degree Blades (blue cap) for Cutting very small font intricate line-art logos.(eg: any thin vinyls)
- 45 Degree Blades (red cap) for Cutting general fonts and vinyl film.(eg: vinyl for traffic sign, flocks, etc.)
- 60 Degree Blades (yellow cap) for Cutting large fonts and thick materials which about 1mm. (eg: reflective material, masking tapes, etc.).

NOTICE:

* Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
* When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem.
* When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.

Package Includes:

5pcs 30° Cutter Blade with spring
5pcs 45° Cutter Blade with spring
5pcs 60° Cutter Blade with spring


0