The 2pcs Matek 4S Lipo to 12V Linear Voltage Regulator Regulate Module for FPV Camera Multicopter is suitable for use with FPV camera. Compared with BEC 12V, this linear voltage regulator features lower ripple so it won&acute;t interfere with image signal transmission. When the temperature is 25→, with 16V input and 12V, 300mA output for 5min, the highest temperature measured is 58→. It can also be connected with an extra 12V 1.5W LED light. If 3S and 4S are mixed, it supports 3S battery too.<!--Features --><p>FEATURES</p><ul><li> Suitable for use with FPV camera</li><li> Lower ripple compared with BEC12V</li><li> Won&acute;t interfere with image signal transmission</li><li> When the temperature is 25→, with 16V input and 12V, 300mA output for 5min, the highest temperature measured is 58→</li><li> Can be connected with an extra 12V 1.5W LED light</li><li> If 3S and 4S are mixed, it supports 3S battery too. Output voltage=3S voltage-1V, eg. the battery voltage is 12V, actual output is 11V, and the camera can work normally </li></ul><!--Specifications --><p>Specifications</p><table width="100%" border="0" cellpadding="0" cellspacing="0"><tbody><tr><td width="131"> Brand</td><td width="365"> Matek</td></tr><tr><td width="131"> Input Voltage</td><td width="365"> 13-17V, 4S LiPo</td></tr><tr><td width="131"> Output Voltage</td><td width="365"> 12V, Accuracy 2.5%</td></tr><tr><td width="131"> Output Current</td><td width="365"> Continuous 300mA</td></tr><tr><td width="131"> Material</td><td width="365"> Plastic</td></tr><tr><td width="131"> Dimensions</td><td width="365"> (0.98 x 0.39 x 0.12)" / (2.5 x 1 x 0.3)cm (L x W x H)</td></tr><tr><td width="131"> Weight</td><td width="365"> 0.04oz / 1g </td></tr></tbody> </table><!--Package Includes --><p>Package Includes</p><ul><li>2 x Linear Voltage Regulator Modules</li></ul><!--Extra Info --><!--produts_compatibility -->