Description :
Forecum FK-9806 Smart Home Magnetic Sensor Alarm With 1 Magnetic Sensor + 1 Remote Controller
Features :
A. One Magnetic Sensor can match with at most 8 remote controllers freely. B. One remote controller could control several magnetic sensors;C. Excellent Home use product， Tiny and fashion;D. Volume : 110DBE. Alarm and door bell function for your option.F. Low energy and long work time.G. Simple install.Product image interpretation : 4 button of the Remote control， function of the Magnetic Sensor.
Specifications :
Magnetic sensor :Voltage : 3V (2 x AAA battery)Stand-by Volume : 100!#!amp!*!mu;AAlarm volume : 30mAFrequency : 433MHZAlarm response time : 200msStand-by time : 8-12 months
Remote control :Voltage: 12V (1 x 12V27A)Stand-by Volume : 1!#!amp!*!mu;AWorking volume : 15MAStand-by time : 8-24 monthsRemote control distance : 20m
Magnetic Sensor size (L x W x H) : 85 x 43!#!amp!*!times;17mmMagnetic Stick size (L x W x H) : 45 x 10 x 14mmRemote control (L x W x H) : 60 x 30 x 11mm
Using method :1. When firstly use the smart home security magnetic alarm， open the cover the battery chamber， press the remote control's leaning code button. Meanwhile， assemble 2pcs AAA batteries on the battery chamber. There will be one Bi...sound when the alarm is open. Then there will be two Bi...Bi...sounds when code pairing is successful. Then the remote control can control the magnetic alarm.2. Install instruction: select the installation place， pear off the cover of the double faced adhesive tape， and stick the magnetic alarm. Magnetic stripe arrow must be aligned with magnetic alarm.
Use Instruction :1) Alarm function : press the Alarm button， the magnetic alarm sound BI BI BI three times to confirm alarm. Then it will BI one time after 5 seconds and enters into the alarm state of alert. When someone levers your doors or windows， the magnetic alarm sounds harshly to drive away the intruders and remind the master.2) Disarm button : press the disarm button， the magnetic alarm will sound BI one time and goes into disarm status.3) Emergent alarm button : when press the emergent alarm button， the magnetic alarm will alarm in any model.4) Doorbell button \/ Learning code button : when press the doorbell button， the magnetic alarm sound Ding Dong. And the magnetic alarm will get out off the doorbell model when presses disarm or emergent alarm urgent button.5) Increase remote controls: disassemble the battery of the magnetic alarm， and continually press the learning code button. Assemble the battery， and the magnetic alarm will sound BI one time to indicate that the alarm is open. And the magnetic alarm will sound Bi...BI...two times in 5 seconds the remote control is added successfully. ( One magnetic alarm can be matched with 8 remote control at most.)6) Add magnetic alarm : continually press the remote control's learning code button， and assemble the new magnetic alarm's battery. When the magnetic alarm