【1080P Transmission】-- This AGPtEK HDMI extender supports 1080P HD, HD Audio, 3D; It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6 or higher level cables following standard IEEE-568B, For better performance, we suggest to use cable longer than 45ft/15m
【HDMI Lossless transmission】-- It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection,Adjust the specification automatically for different cable lengths 1-60m to achieve the best display
【Pure Hardware Transmission】-- It is pure hardware design,No driver needed, plug and play. Adopt full HD transmission technology to make the video image more vivid
【IR Remote Control】-- Support 20~60KHz wide Frequency IR signal transmission fro controlling the source device, IR Emitter Cable and IR Receiver Cable are included
【Installation Requirements】-- HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc); HDMI display device like SDTV, HDTV, projector with HDMI port; UTP/STP cat6/6A/7 cable, ,One-year

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 5.91 inch
Height : 3.39 inch
Length : 7.95 inch

Item Weight: 1.1 pounds (View shipping rates and policies)
Shipping Weight: 1.1 pounds (View shipping rates and policies)

ASIN : B00Z9OW6DQ

Product Description

Description: The HDMI extender over a single UTP cables with IR control is the right way to send your HDMI signal over long distances. Instead of using expensive HDMI cables, this device lets you use your existing Cat6/7cables/sockets while also performing the same functions like transferring Deep Color video and new lossless compressed audio. And if that weren''t enough, you can use your existing remote to control your device through an IR blaster. Specification: HDMI signal: Comply HDCPResolution supported: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz Network cable: Low resistance and consumption oxygen-free copper core（CAT6、CAT6A、CAT7）Transmission length: CAT6:60m at 1080PIR remote control: Support 20~60KHz wide frequency IR remote controlWorking temperature: 0℃～60℃power: DC5V/1Apower consumption: TX：2W； RX<2WProduct size: 2.82(W) x 2.62(D) x0.98(H)inch Package Contents:1 x HDMI to RJ45 sender TX1 x RJ45 to HDMI receiver RX2 x DC5V/1A power1 x User manual1 x IR blaster extension cable1 x IR receiver extension cable Note:1.High quality cat6 or cat6a cable is needed to work with this hdmi extender,preferably longer than 15 meters/45ft or above 2.Only supports the PCM audio output 3.Do not mix up HDMI to RJ45 sender and RJ45 to HDMI receiver before installation.4.Do not hot plug when it is working.5.Make sure the cables in right connection.6.Please press RX RESET button when no image output.7.Please make sure the cables follows 568B and reset TX/RX to input HDMI Signal when RX''LINK'' Led is flashing all the time.