Applicable objects: Watch tool
Model: Toolkit
该套具备最简最实用的修表工具，可以打开手表换电池，压盖旋盖的手表都能打开，可以随意拆换表带，修改表带长短，打开机芯内部修理，一般修修弄足够，总之避免简易型套装价低不实用的问题，是初学修表爱好者及修表工作者的理想选择。
This set has the most simple and practical repair table tool, you can open the watch for the battery, gland cap can open the watch, you can disassemble the strap, modify the strap length, open the internal repair of the movement, the general repair Enough, in short, to avoid the simple set of low price is not practical problem, is the beginner to learn table lovers and repair table workers ideal choice.
标准版修表工具包含：（详见上图）
1：手表固定座一个（用于开盖时固定表壳用，配合三爪开盖器使用）
2：拆钢表带工具：拆带器（拆钢表带长短使用，操作简单）
3：镊子（箭头镊子 质量好 夹细小零件更方便）
4：高级铝合金双头生耳批（圆头适用于拆蝴蝶扣表带，V型口用于拆卸安装皮表带）
5：黄色撬刀（用于撬开手表后盖，撬开后盖换电池、维修等）
6：三脚开盖器一把（配有18个钢牙 适用旋入式后盖，后盖一般后盖都有6个卡口，工具最大可开约37mm后盖）
7：一字螺丝刀3个（不同规格）
8：钢表带冲针三支（这个配合米子座和小榔头使用，用来截钢表带长短）
Standard Edition repair table tools include: (see above)
1: a fixed watch holder (for opening the case when the fixed case, with the use of three claw open cover)
2: split steel strap tool: take the device (demolition watch the length of use, easy to operate)
3: tweezers (arrow tweezers good quality clip small parts more convenient)
4: high-grade aluminum alloy double-headed ear batch (round head for the removal of butterfly buckle strap, V-port for the installation of leather strap)
5: yellow pryls (for prying the watch back cover, pry open the back cover for batteries, maintenance, etc.)
6: three feet open a cover (with 18 steel teeth for the screw-type back cover, the back cover has a general back cover 6, the maximum tool can open about 37mm back cover)
7: word screwdriver 3 (different specifications)
8: steel strap with red needle three (this with the Yazi Block and small hammer to use, used to cut the length of steel strap)
16件修表工具包含：（详见上图）
1：两脚开表匙:开启以及锁紧螺丝芽底盖的，直接用工具前面二个脚对准底盖的:
缺口往右方向转。便可轻松打开手表底盖（建议配合固定底座一起使用，以免表盖打滑）
2：翘底刀:用于压底的手表底盖必须用到的工具之一，撬底刀。
3：拆表带器:如果你的手表是新的话，拆表带的时候用它最方便。
4：生耳批:用于拆手表壳与表带之间的生耳，或皮带的生耳最好用了。
5：红色钳:装拆手表难免要用到钳子，如拆表带里用来夹出发夹，销钉等等。
6：胶座:拆手表链时，将表链夹在胶座上架上。非常方便地将表带装上或拆开。
7：中号红柄十字螺丝批:用于机械内部装拆用途。
8：小号黑柄十子螺丝刀:用于表内小零件的拆装。
9：小胶锤:拆表带后装上的时候用来敲打表针,也可用在其它需要的地方。
10：小冲三支:用于顶针用。
11：尖咀镊:用于夹一些配件与及其它细小零配件等等。
12:米字坐:拆装表链时也得经常用到它。
13：一字螺丝刀三枚：尺寸为1.2MM，1.4MM，1.6MM。
16 pieces of table repair tools include: (see above)
1: two feet open spoon: open and lock the screw bud bottom cover, directly with the front of the tool two feet at the bottom cover:
Gap to the right direction. You can easily open the watch bottom cover (recommended with a fixed base together to avoid the table cover slip)
2: Alice knife: for the bottom of the watch bottom cover must be used one of the tools, pry the end knife.
3: split the strap: If your watch is new, when the demolition of the band with it the most convenient.
4: raw ear batch: for the demolition of the case and the band between the ear, or the best ear with the ear.
5: red pliers: disassembly watches must use pliers, such as the demolition of the strap used to clip hair clips, pins and so on.
6: plastic: split the bracelet, the watch chain clip on the plastic frame. Very easy to put the strap or open.
7: medium red handle cross screwdriver: for mechanical internal assembly and use purposes.
8: trumpet black handle ten screwdriver: for small parts of the table disassembly.
9: small hammer: split strap after the time used to beat the table, can also be used in other needs.
10: small punch three: for the top needle with.
11: tip Tsui tweezers: used to clip some accessories and other small parts and so on.
12: meter word to sit: disassemble the bracelet also have to use it often.
13: word screwdriver three: size 1.2MM, 1.4MM, 1.6MM.
皮老虎修表工具包含：（详见上图）
1：三脚开盖器一把【适用旋入式后盖，后盖一般后盖都有6个卡口，工具最大可开约37mm后盖】
2：三脚开盖器用的脚趾一盒
3：撬底刀一把【适用于压入式底盖，卡住撬口处撬开即可】
4：开表座一个【用于开盖时固定表壳用，配合三脚开盖器使用】
5：一字螺丝刀二把【不同规格】
6：钢带用冲针二根【用于截表带长短使用，配合米字架和小榔头使用】
7：打孔冲两枚【表带打孔、2MM】
8：高档双头生耳批一把【用于拆装皮表带】
9：皮老虎一个【手表清洁】
10：小胶锤:拆表带后装上的时候用来敲打表针,也可用在其它需要的地方
Leather tiger repair table tools include: (see above)
1: three feet open cover a [apply screw-type back cover, the back cover has a total of six bayonet, the maximum tool can open about 37mm back cover]
2: three feet open cover with a box of the toes
3: prying knife at the end of a [apply to press the bottom cover, stuck pry open at the pry can]
4: open a table seat [for opening the case when the fixed case, with three feet open cover device]
5: word screwdriver two [different specifications]
6: steel needle with two [for the use of truncated long and short, with the meter and the use of small hammer]
7: punch punch two [strap punch, 2MM]
8: high-end double-headed ear approved a [for the dismantling leather strap]
9: leather tiger a [watch clean]
10: small hammer: split the strap when used to beat the table when the needle can also be used in other places
米字座修表工具包含：（详见上图）
1：三脚开盖器一把【适用旋入式后盖，后盖一般后盖都有6个卡口，工具最大可开约37mm后盖】
2：三脚开盖器用的脚趾一盒
3：撬底刀一把【适用于压入式底盖，卡住撬口处撬开即可】
4：开表座一个【用于开盖时固定表壳用，配合三脚开盖器使用】
5：一字螺丝刀二把【不同规格】
6：钢带用冲针三根【用于截表带长短使用，配合米字架和小榔头使用】
7：米字架一个【用于截表带时固定表带使用】
8：小个双头生耳批一把【用于拆装皮表带】
9：小榔头一把
10：尖咀镊:用于夹一些配件与及其它细小零配件等等...
Meter name table repair tools include: (see above)
1: three feet open cover a [apply screw-type back cover, the back cover has a total of six bayonet, the maximum tool can open about 37mm back cover]
2: three feet open cover with a box of the toes
3: prying knife at the end of a [apply to press the bottom cover, stuck pry open at the pry can]
4: open a table seat [for opening the case when the fixed case, with three feet open cover device]
5: word screwdriver two [different specifications]
6: steel needle with three [for the use of truncated long and short, with the meter and the use of small hammer]
7: rice frame a [for the cut strap when the use of fixed strap]
8: a small double-headed ear approved a [for the removable leather strap]
9: a small hammer
10: tip Tsui tweezers: used to clip some accessories and other small spare parts and so on ...
大三爪修表工具包含：（详见上图）
1：三脚开盖器一把【适用旋入式后盖，后盖一般后盖都有6个卡口，工具最大可开约55mm后盖】
2：三脚开盖器用的脚趾一盒
3：撬底刀一把【适用于压入式底盖，卡住撬口处撬开即可】
4：开表座一个【用于开盖时固定表壳用，配合三脚开盖器使用】
5：一字螺丝刀三把【不同规格】
6：钢带用冲针三根【用于截表带长短使用，配合米字架和小榔头使用】
7：高档双头生耳批一把【用于拆装皮表带】
8：米字座一个
9：小胶锤:拆表带后装上的时候用来敲打表针,也可用在其它需要的地方.
1: three feet open cover a [for screw-in type back cover, the back cover has a general back cover 6, the maximum tool can open about 55mm back cover]
2: three feet open cover with a box of the toes
3: prying knife at the end of a [apply to press the bottom cover, stuck pry open at the pry can]
4: open a table seat [for opening the case when the fixed case, with three feet open cover device]
5: word screwdriver three [different specifications]
6: steel needle with three [for the use of truncated long and short, with the meter and the use of small hammer]
7: high-end double-headed ear approved a [for the dismantling leather strap]
8: a meter word
9: small hammer: split strap after the time used to beat the table, can also be used in other needs.
全能型修表工具套装包含：（详见上图）
1：手表固定座一个（用于开盖时固定表壳用，配合三脚开盖器使用）
2：取针钳一个（用于表针的装和卸还有调节）
3：蓝色拆钢表带工具 下钢表带 操作方便 （拆钢表带长短使用）
4：黄色撬刀（用于撬手表后盖 撬开后盖方便维修或换电池）
5：表布一块（用于清洁手表）
6：三脚开盖器一把（配有18个钢牙 适用旋入式后盖，后盖一般后盖都有6个卡口，工具最大可开约35mm后盖）
7：钢表带冲针三支（这个配合米子座和小榔头使用，用来截钢表带长短）
8：一字螺丝刀3个（不同规格）
9：红色钳:装拆手表难免要用到钳子，如拆表带里用来夹出发夹，销钉等等
10：小号黑柄十子螺丝刀:用于表内小零件的拆装
11：尖咀镊:用于夹一些配件与及其它细小零配件等等
12：10倍放大镜一个
13：小胶锤:拆表带后装上的时候用来敲打表针,也可用在其它需要的地方
14：高级铝合金双头批 （圆头适用于拆蝴蝶扣表带 V型口用于拆卸安装皮表带）
All-round repair table tool package contains: (see above)
1: a fixed watch holder (for opening the case when the fixed case, with three-legged open cover device)
2: take a needle clamp (for the preparation and unloading of the stylus)
3: blue demolition steel strap tool under the steel strap easy to operate (demolition of the length of the use of steel strap)
4: yellow pryls (for prying the watch back cover pry open the back cover for easy repair or battery replacement)
5: table cloth one (for cleaning the watch)
6: three feet open a cover (with 18 steel teeth for the screw-type back cover, the back cover has a general back cover 6, the maximum tool can open about 35mm back cover)
7: steel strap with red needle three (this with the Yonago and small hammer to use, for cutting the length of the strap)
8: word screwdriver 3 (different specifications)
9: red pliers: dismantling the watch will inevitably use pliers, such as the demolition of the strap used to clip hair clips, pins, etc.
10: trumpet black handle ten screwdriver: for the small parts of the table disassembly
11: tip Tsui tweezers: used to clip some accessories and other small parts and so on
12:10 magnifying glass one
13: small rubber hammer: demolition of the strap when used to beat the table when the needle can also be used in other places
14: high-grade aluminum alloy double-headed batch (round head for the demolition of butterfly buckle strap V-shaped mouth for the removal of the installation of leather strap)
豪华版大三爪工具包含：（详见上图）
从左往右（共23个部件，精选齐全不浪费，质量可靠放心购）
1：米字座一个、手表固定座一个、优质皮老虎一个，表布一块、10倍放大镜一个
2：防水膏一个、蓝色尖嘴钳一把，55MM大三爪开一个（最大可开六个凹槽后盖直径55MM以内）
3：优质版蓝色窄口撬刀一个、取针器一个，红色金属拆带器一个（送三个顶针）
4：高级铝合金双头批一个、镊子一个、一字螺丝刀两把，1.6十字螺丝刀一把
5：不同型号冲针三个、2mm打孔冲子一个，红色点油笔一支、小毛刷一支，小胶锤一把
1: a meter word, a watch fixed seat, a high-quality leather tiger, a piece of cloth, 10 times a magnifying glass
2: a waterproof paste, blue needle nose pliers a, 55MM big three claws open a (maximum can open six groove back cover diameter 55MM or less)
3: high-quality version of the blue narrow mouth pry a knife, take a needle, a red metal belt take a (send three thimble)
4: high-grade aluminum alloy double-headed one, one tweezers, one word screwdriver two, 1.6 Phillips screwdriver
5: different models of red needle three, 2mm punch punch a red pen a pen, a small brush, a small plastic hammer
豪华版大三爪精简版包（详见上图）
55MM高级二爪工具包：（详见上图）
55MM大三爪标准版（详见上图）
55MM大三爪优选款（详见上图）
55MM大三爪升级版：（详见上图）
55MM大三爪精装版：（详见上图）
该套具备最简最实用的修表工具，可以打开手表换电池，压盖旋盖的手表都能打开，可以随意拆换表带，修改表带长短，打开机芯内部修理，一般修修弄足够，总之避免简易型套装价低不实用的问题，是初学修表爱好者及修表工作者的理想选择。
