Item Descriptions:

Style name:

Rigid type

Product introduction

Extend the upper side of the body by about 12 mm to ensure a smart fitting seating surface (Minoura STD body height = 90 mm).

Long center pad, compact release knob easy to operate with one hand, oscillating clamp standard equipment.

Applicable model Dimensions Estimated = width 50 ~ 85 mm (left and right notch retraction is width limit standard), thickness 6 ~ 18 mm, weight 300 g or less.

Select a combination of upper and lower arms and side hooks according to the model, and adjust and fix them, respectively.

Usage notes

* Because the installation position of the power button, camera, speaker, earphone jack and so on varies depending on the model of the smartphone, there are occasions when it may be inevitable to install it in a state where it is difficult to use.

* The trouble (breakdown, dropout, breakage, water wetting, theft, etc.) that occurred in the main body of the smartphone attached to this product is out of warranty in any case.

* The use with the slide arm extended to the maximum extent is not recommended.

Arm may break due to vibration (not covered by warranty).

* Depending on the type of smartphone you use Adjustment Fixed parts are required for parts damage, loss is not covered by the warranty.

Features:

• Handle diameter φ22 ~ 29 compatible products.
• Holder total length = 102 mm.
• Estimated use of the arm is 110 to 147 mm total length = vertical slide arm model total length 152 to 163 mm = upper slide arm + lower rigid arm.

Product information:

Shipping Weight: 244 g

Package Dimensions: 5.69 x 10.79 x 21.21 cm