Features:

 

1. 2. Anti-corrosion chassis stoning 3. noise reduction insulation 4. 5. 6. Anti-shock drag the bottom

 

[Product Name]: Botny armored vehicle chassis armor chassis rust plastic automotive noise insulation oily self adhesive spray pattern

 

Product specifications: 700ML 

[Validity period]: Three years

How to use:

 

1. new and used vehicles must use high-pressure washing gun or car chassis thoroughly cleaned;

2. If the old rust will have to eradicate skin， surface oil must be cleaned by air drying after cleaning， after which no part of the paper tight spray coverage (including the engine exhaust pipe ﹑ ﹑ ﹑ spring ﹑ tank chariotest number etc.).

3. Manually turn on the lid， insert the product company dedicated gun and shake to make it uniform， (aerosol-type vehicle chassis glue before using the tank shake 30 seconds to press the spray nozzle) and then spray evenly distance 25cm can be.

The normal thin spray jet should be repeated three times to have a certain time interval between the spray， preferably at an interval of 10 minutes or more at room temperature (until dry to the touch)， after the first injection is completed， there are holes to cracks ﹑ ﹑ connected at joints must fill Calibrating then spray glue patch， the thickness of 2mm or more soundproofing effect is obvious.

 

[Note]:

 

1. Do not be constructed at temperatures below 5 degrees or humidity is higher than 85%， normal storage temperature should be 10-35 degrees.

2 and 7 days after construction * Do not use high-pressure water wash chassis.

3， to avoid freezing and high temperature， kept tightly closed store