?Brand: N/A
Model: HOT-A1-00018
Quantity: 1 Piece
Material: Alloy Aluminium
Specification
Input Voltage: 24V
Socket Output Voltage: 220V
Socket Output Current: 10A
USB Output Voltage: 5V
USB Output Current: 1A
Continuous Output Power: 1000W
Peak Output Power: 2000W
Waveform Type: Modified Sine Wave
USB: USB 2.0
Output Socket: Universal plug
Conversion Efficiency: more than 90%
Output Frequency: 50Hz
Over Voltage Protection: Yes
Low-voltage Protection: 10.08V
Over-temperature Protection: 65℃
Indicator Light: Yes
Power Cable: Yes
Application：Cellphone， Notebook， Digital Camera， GPS Navigator， Bluetooth Kit， DVD， Monitor， PDA
Other Features Operating: Temperature:40 ℃

PRODUCT PERFORMANCE CHARACTERISTICS
DC?input: 24V
AC output: 220V/50Hz
Have a fully functional protective circuit:Short circuit、Overrating、Overload overtemperature?、inverse?.?protection?
Conversion efficiency up to 90%
Low interference technology
Soft start function
Same size， light weight， faint noise ，free maintenance
Features
High?converting??efficiency
Under voltage shutdown protection
Over voltage shutdown protection
Latest soft-start technique
Overload protection
Overheat protection
Alloy aluminium case
Usage method
1.Place the power switches of the inverter and the AC device on the OFF position.
2.Connect properly to DC power source in compliance with the rating input voltage.
3.Plug the cord of the AC device in the output socket of the inverter.
4.Turning the switch of inverter on (the switch indicator gives light)， then that of the AC device， this AC device can be used now as under the power supply.
Warning
Please treat the outlet of the inverter with the same respect as that of any household power .
Don’t place any article on/over the inverter when operating . Keep the circulation of air around it.
It gets so hot after working at a full load for a long time that it may hurt you if you touch it.
Avoid the reach of children
Avoid using it at a place that is wet ， high temperature ， flammable or explosive.
Note:
When the red light is flashing may be caused by the following improper operations:
1.The battery voltage is not correct.
2.Short circuit: The line connected is error.
3.Overload : The electric devices voltage is too high.
When the machine gives out a lot of noise may be caused by the following problems:
1.Overheat
2.Overload
3.Overvoltage
4.Others

Packing list:
1 x Inverter 2 x Battery cables (50cm)