Differentiated heat radiation performance with reinforced heat-resistant material 
and the ventilation structure design in consideration of heat flow

Black and simple high-glossy dashcam

High-quality 5-glass lens with pure aluminum housing for 2 mil pixel images

Wide view angle of 130° in the front and 120° in the rear records images without blind spot.

The reliable image sensor made in Korea provides high-quality and clear Real HD image.

Equipped with 1G DDR3 memory and high-performance CPU, ZALBAR provides smoother and more natural image than other dashcams of 15fps ZALBAR records seamless, vivid image even while fast driving.

High reliability with all the accidents detected

2-channel camera provides vivid image of the site.

In the parking mode, ZALBAR records image if a motion is detected.
the front high-quality Security LED flickers 24 hours a day, protecting your car against any intentional damage.

ZALBAR works even after the engine stops, and it stops operating if the voltage of the battery gets lower than the set value.
You can see and apply the low voltage setting on the Configuration menu of the viewer program.

Store images even during accident power off through power supply from super capacitor

You can format the SD card easily by just pressing a button on the dashcam. 
If you press and hold the M button, the system formats the micro SD card with a voice guide. 
Do not stop the engine while ZALBAR is formatting the card.

The built-in mic at the top of the Power button records sound inside the car together with image, 
providing more accurate and objective data.

If the temperature rises above a certain level, ZALBAR`s high temperature protecting function
shuts off the power automatically, protecting the saved image and the device.

Accurate location and speed are indicated in the recorded image. 
You can trace the route you have traveled on the ZALBAR Viewer through the Google map.

The image taken during driving (day) is saved every minute in the INFINITY folder.

If you stop the engine and pull out the key, ZALBAR starts recording image with a voice guide in 10 seconds, 
and saves image in the PARKING folder. If a motion or a change of image is detected, the system saves the image.

If a quick braking, Brake acceleration or quick turn is detected by the 3-axis acceleration sensor, 
ZALBAR records a 30-sec image (15 sec before ~ 15 sec after the impact). 
If the memory is full, the system deletes files in FIFO, to continue recording. Images are saved in the EVENT folder.

You can start recording manually by pressing the REC button. The image is recorded in the MANUAL folder.

Installed front/rear camera