Series 2 not supported

I tried installing it on Apple Watch Series 2 (aluminum 42 mm). I thought that it would be okay if the thickness change of about 0.9 mm, but the digital crown does not turn around when I install it. Therefore please do not purchase Series 2 person. ★ 3 evaluation is a pure evaluation point of the product. The product is a plastic key, and if it hits it will easily peel off the plating.

It is cheap but ...

2016/09/30 The display part has become a transparent cover but there are distortions and scratches, and it is hard to see a bit. I have pasted the glass film, but it reacts without problems. There is criticism about the color of rose pink, but it is unavoidable that texture is different as it is simply glossy plating. After joining the top and bottom of the cover you can see it but you will not notice it when you actually wear it. I think the plating of the frame is probably vapor deposition plating. It is vulnerable to frictional abrasion and there is a high possibility that the substrate is easily exposed. You can tell this subject by continuing to use it. 2016/10/03 I uploaded the image with the cover mounted. The cover does not cover the entire Watch. You can see the silver of Watch itself from the gap between the band and the cover. Please pay attention to this point and purchase.

The design is also simple and good feeling.

After purchasing Apple Watch for the first time, e - money life began. I was worried about touching the leader everywhere and getting scratched on my precious Apple watch occasionally, but after wearing it I am relieved. I am going to use it for a long time, so this case is very helpful.

It can not be used with Apple Watch Series 2, but if you work on OK

When attaching this case to Apple Watch Series 2, the bezel did not turn and could not be pushed. . . Speaking of that, Series 2 should have gotten a little thicker, so it must be a case for Series 2, is not it? However, as I saw it seemed that the bottom of the case was hitting the bezel part, I cut it with scissors and made it into an inverted U shape so that I could use it. By the way, the side button can be used without hitting the rim, and since the case is covered to the bottom of the side button, it does not seem to be detached. The case itself is thin, I think that the smartness (feeling that there is no goggle) when wearing is wonderful. I think that I can recommend it for Series 1 people.

I think whether it can be used even for series 2 if it compromises a little.

I purchased it for knowing that it does not fit the series 2, and it processed a little. Many reviews say that the digital crown does not turn, can not be pressed, exactly the same. There seems to be someone who is cutting or bending, but I put a little break on compromise and easy handiness, I put snapping with a nail clipper at the bottom of the digital crown part of the cover, at the bottom. When wearing it, it does not turn as much as not being worn, but there is no problem with operation. I am not concerned about myself which is not noticeable so much as it is under the digital crown. Originally for the first generation, there are subtle misalignment of the microphone hole, the speaker hole, side buttons so if you do not ask for perfection think this method is the quickest. If such a compromise can be forgiven, I think that this price is at all in this set. By the way, the color is different from pure gold as genuine. But since it is the same color as the metal belt of many pink golds sold at Amazon, I think that you can match the same color with the belt and case if you buy it too.

I am relieved

Since absentee votes were posted at the post of the house, the product had already arrived after confirming the work place (postal service). When fitted to AppleWatch 2 I felt fit to the sports band and it looked better

Amulet degree

Will it be an amulet for scratch prevention? Because it is soft, desorption is easy, but if you use it it will soon hurt so whether to have a year. I want you to sell it in two identical colors instead of a set of black and white. I did not use white because I wanted black.