100% brand new and high qualityMaterial: MetalColor: As the picture showsDial Test Indicator GaugeFeatureFowler inch/metric dial test indicator with yellow face is designed to measure surface variations in narrow or recessed areas0-0.8mm measuring range， 0.0005"/0.01mm graduations， 0-40-0 balanced inch readings， and 0.001mm balanced metric readingsAuto-reversing contact point and adjustable bezelThree dovetail mounts for mounting indicator from the top，back，or frontOne-piece housing with satin chrome finish provides durabilityThis dial test indicator is designed for taking measurements in machining，layout，and inspection work.The dial has microfine black graduations for 0-40-0 balanced inch readings and red graduations for 0.001mm balanced metric readings.A movement and an auto-reversing contact point provide smooth action.A knurled bezel rotates 360 degrees to zero the reading at any location.Three dovetail mounts on the top，back，and front of the indicator provide a range of mounting options.The one-piece housing and satin chrome finish provides durability.This dial test indicator includes one 3/8" and one 5/32" dovetail clamp and a molded case.Dial readings with three digits，0-40-0 for example，signify that the indicator has a balanced dial. Dial readings with two digits， 0-100 for example，indicate the dial has a continuous dial.Balanced dials are used for reading the difference from a specific surface reference point.Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.SpecificationsFace 1-1/4" diameter yellow faceDial type and reading 0-40-0 balanced inch and 0-.25-0 balanced metric readingsRange 0-0.8mmGraduations 0.0005"/0.01mmContact point length 1/2"Dovetail clamps 3/8" and 5/32"Mounting type DovetailCharacteristic & FunctionA magnetic stand that uses a switchable permanent magnet for convenient mounting onto flat iron or steel surfaces. The arm can be hydraulically locked in any position using the knob on the upright . Useful for holding dial indicators or dial test indicators during alignment operations.Quantity:1PcNote: Due to the difference between different monitors， the picture may not reflect the actual color of the item. Thank you!