Emergency Car Jump Starter derv&Petrol Version Instant Startup For 12V Vehicle
Multi-Function Car Battery Power Bank 38000mah For Car/Motorcycle/Digital Products
High Quality+High Security+Full Charge+Post Free
** What should you do if your car drop anchor on the highway or can't start in the cold weather?
** What should you do if your mobile no power when you are out of door?
** What should you do if your laptop no power when you are negotiating customer about a big order?
Don't worry, my mini portable car jump starter can solve your emergency issue.
Specifiction
Strong Functions
Used For
Car, mobile phone, PSP, MP3/MP4/MP5,Tablet PC, PDA,Camera etc.
1: Car emergency start charging
2: Mobile phone charge
3: Notebook charging
4: Lighting and warning (SOS) lamp
Instructions for Staring Car Engine:
1.Before start the car,please make sure the hose minimum 3 LED indicated light on,then connect the blue plug fully seated into the host socket, and confirm the cable indicator is off.
2.Connect the Red clip to the positive(+)battery terminal, Black clip to the negative(-)battery terminal.
3.Start the vehicle.
4.When the vehicles starts, please make sure pull up the clamp cable from power bank and then from
the car battery. Please do not connect the red and black clip to the vehicle battery terminals
more than 30s.
More detailed Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable,
auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device
is full-charged.
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER.
Four lights indicate 80% balance, three lights indicate
60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is
empty when all LED lights start to flash.
5, Press the switch five seconds to start If you want to use LED for illumination and select the status
( light, strobe, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Package List
1* portable bag
1* 2-round-pin plug home adapter for Russia and Europen countries
(if you 2-flat-pin plug adapter,please leave a message)
1* car charger
1* laptop charging cable
8* laptop connector
1* 4-in-i mobile phone adapter
1* wire clip
1* English user manual
FAQ
Q1: Which function do start power supply have?
A1:the starter power is mainly used to charge the portable electronic devices,such as mobile smart phone,tablets,portable gaming,systems,digital cameras,camcorders,bluetooth headsets,portable GOS devices,and any other DC 5V powered electronic devices.It can also jump start a drained car battery with the jumo starter cables.There's also an included ultra-bright LED light that can be used as a flash light or SOS signal flashing light.
Q2: How can LED emergency lighting be truned on?
A2: turn master switch of start power to "ON" and press"power button" for 3
seconds to start flashlight function. Afterwards, press "power button" LED function to
turn normal on to flickering,SOS distress signal light; press "power button" to directly
turn it off.
Q3:The start power supply has 19V and 12V output functions, how can V number be switched?
A3: the start power supply can guarantee several V number selection. Before charging with start
power supply,press "power button" for short time to switch among different V numbers and
corresponding indicator light are normally on, Different products use different voltage, eg.: laptop
generally have 19V and 16V. Before use, please confirm products V number.
Q4: How can an auto be started?
A4: if an auto can not be started by the storage battery because of various reasons,the start
power supply can exert supernatural effects.At first ,inspect electrical quantity of start power.
Generally,the auto can be started when there is one check display of indicator light. Connect positive
and negative polarise of storage battery with positive and negative polarities of storage battery. After
red polarities and black polarities are clamped,insert plug of battery terminal into start outlet of start
power,turn auto key to star auto. After start the auto,remove clamps from battery.
Q5: Will reversing polarity connections of the jump start cable damage the
vehicle?
A5: No,the start power is very safe with comprehensive protection, If you
accidentally connect the red and black cable clamps to the wrong polarity terminal and
attempt to jump start the vehicle,the fuse will be blown and will cut the power
immediately to prevent injury and avoid damaging the vehicle.
Q6: What if it doesn't jump start the vehicle?
A6: If the start power fails to jump start the engine,please wait at least 10 seconds before attempting to try again,it is also highly recommended to replace the vehicle battery once every 2 or 3 years.
Q7: How many times can the start power jump start a vehicle?
A7: Approximately 20 times with a 100% fully charged battery.Results may vary
depending on owner usage and vehicle engine displacement.
Q8: How can start power supply be charged?
A8: turn product switch to "ON", Use home adapter or Car adapter connected to
220V(110V-240V) commercial power or 12V car powersupply,product will begin to
charged. the indicator light will be flash all time. when four indicator light are on,it
indicates the power supply has been full charged!
Q9: How long will it take to fully charge the start power to max capacity?
A9: 5-6 hours.Depending on the current battery charge indicator, local voltage and local environment
Q10: How long is he start power's standby time?
A10: The typical standby time of the start power is 3 months fully charged.
It is recommened to charge the start power once every 3 months to prolong its service life.Result may vary depending on owner usage.
