Mini-SAS SFF-8087 to 4 SATA Cable at 90Deg L angled cable. This 0.8m cable uses 30 AWG wires and is intended for internal use. It has a single 36-pin SFF-8087 male Mini-SAS plug (with locking latch) on one end and has four 7-pin SATA female plugs (with locking latches) on the other, allowing user to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA disks, or a SATA/SAS backplane. Features: Brand by Akiba-Accessories High quality low loss cable Supports data transfer rate of up to 6Gb/s and features SFF-8087 (36-Pin internal Mini-SAS) to four 7-pin SATA fan-out connectors. With latched connectors Connectors End A : SFF-8087 (36-pin internal Mini-SAS) Connectors End B : 4 X 7-pin SATA Cable length : 80cm Package Content: 1 x Mini-SAS SFF-8087 to 4 SATA Cable 1 x Protective Cover at Mini-SAS Connector (Note : Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time) If you need Straight type, click CW-S37-5I Specification Brand: Akiba Accessories Package Content: N/A Specification: • Connects any external eSATA drive. • Serial ATA Cables can keep your system cooler by reducing restriction to airflow and neat inside. • Provide high bandwidth between hard drive and motherboard. • Connectors : 7Pin Female to Female • Length : 1.5 met Feature: N/A