Works with GSM,CDMA 850MHz 2G 3G Bamd 5 network frequency
Reduces dropped calls and improves the voice quality
Could cover about 2000sq.ft in your home and office,villa,garage,basement and so on
The installation requires no technical experience,it is very easy to install
FCC authentication certificate

Technical Details

Product Details

Package Dimensions
Width : 6.89 inch
Height : 5.91 inch
Length : 16.73 inch

Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B071VR8B3G

Product Description

1.Before order please make sure your mobile frequency is 850MHz 2G 3G in your area.
2.It is better to determine the exact in different location until your phone could receive the best signal,then permanently mount the outdoor antenna.Keep the distance between the outdoor antenna and indoor antenna should be above 22ft and make sure a proper amount of physical separation between outdoor antenna and indoor antenna.These things are absolutely critical for this booster to work.

Operation Frequency:824-849MHz(Uplink),869-894(Downlink)
Emission Designator:CDMA(F9W)
AGC LEVEL:Uplink:-44.00 Downlink:-57.00
Max.Antenna Gain:Uplink:7.9dBi Downlink:6.6dBi
FCC Classification:B2W/Wideband Consumer Booster(CMRS)

Packing:
Signal Repeater Booster
Outdoor Yagi Antenna
Indoor Panel Antenna
32ft 5D-FB OD7.5 Coaxial Cable
16ft 5D-FB OD7.5 Coaxial Cable
Mounting Screw Kit
English User Manual

Guarantee:
FCC authentication certificate

Installation Guide:
1.Tightly connect the 32ft coaxial cable to the Outdoor Yagi Antenna
2.Check and find a place where your cell phone can receive the best signal outside your house,then mount the Outdoor Yagi Antenna and keep the outdoor antenna towards the cell phone signal tower
3.Mount the signal booster device somewhere inside the house,the signal booster should be mounted in a place where is near from the power socket, and have good ventilation.
4.Tightly connect the 32ft coaxial cable to the OUTDOOR port of the signal booster
5.Tightly connect the 16ft coaxial cable to the Indoor Panel Antenna and the INDOOR port of the signal booster