Features:
FPV 5.8G 600mW A/V 32CH Transmitting/Receiving System TS832 + RC832 RP-SMA
32 channels: Cover A， B， E bands and F band (Airwave band)， 4 bands and all frequencies compactable;
Two switching buttons: CH button for frequencies channels switching， FR button for frequencies bands switching;
Two digits display: one for CH and the other for FR， real-time positioning which frequency band and which channel received;
Power off memory: Replay the very last frequency band and channel
Independent video and audio signal outputs

Specifications:
Video format supported: NTSC/PAL
Antenna connection: RP-SMA， jack (module side， both TX and RX)

TX TS832:
Power input: 7.4-16V (3S Lipo suggested)
Transmitting power: 600mA
Antenna gain: 2db
Working current: 220mA at 12V
Video bandwidth: 8M
Audio bandwidth : 6.5M
Dimension: 54x 32x 10mm(excluding antenna)

RX RC832:
Power input: 12V
Working current: 200mA max
Antenna impedance: 50ω
Antenna gain: 2db
Video impedance: 75ω
Video format: NTSC/PAL auto
Dimension:  80x 65 x15mm

Note: TX antenna must be installed properly before it is switched on， power on without install antenna， or a improper antenna was used may easily burn the TX， and such damage is not covered by warranty.

Package Included:
1 x transmitting unit (TX)
1 x receiver (RX)
2 x antennas (2db)
1 x basic wires set